Jump to content
Ultimaker Community of 3D Printing Experts

UMO build platform extension


Recommended Posts

Posted · UMO build platform extension

Hi, I was wondering whether there was any way to extend one of the axis of the ultimaker original to make bigger prints? And whether anyone has done this before and posted plans.

Thanks.

  • Link to post
    Share on other sites

    Posted (edited) · UMO build platform extension

    There is no logical reason why it shouldn't be possible (within reasonable size additions of course) but...

    You would probably be better off just building a machine from scratch, borrowing ideas from the ultimaker design (or even directly altering the design files that are available as open source on GitHub).

    While you would be able to keep motors, feeder, hotend etc. of an UMO (a lot of the components not directly related/attached to the axis) a conversion like the one you mention would as a minimum require new smooth rods, new belts, new frame, new build platform and possibly wires and bowden tube that would now not be long enough to reach out to the extends of the printer.

    Modifying the opensource drawings (eg. extending the front, back and build platform pieces to fit a longer x axis) having those lasercut and ordering parts to fit will be a bit time consuming, but will end up being as cheap (or cheaper) than a used UMO and I don't think it would be more difficult when it comes to the assembly part.

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...