Jump to content

Welches Filament für GameBoy PET,PLA, ABS?


peter100

Recommended Posts

Posted · Welches Filament für GameBoy PET,PLA, ABS?

Hallo in die Runde,

ich habe mir einen UM2+ gekauft und möchte mir nun mein Gameboy Gehäuse ausdrucken.

Welches Material ist hier besser geeigent ?

Ich habe gelesen, für Anfänge ist PLA besser geeignet, nur ich glaube für einen GB ist es zu weich ?

Oder dann doch besser ABS ?

Bei PET bin ich mir ganz unsicher, da dies ja eine Muschung aus ABS und PLA sein soll.

Über einen Tipp, würde ich mich wirklich freuen.

Gruß Peter

  • Link to post
    Share on other sites

    Posted (edited) · Welches Filament für GameBoy PET,PLA, ABS?

    Hallo Peter,

    ich kann Dir empfehlen, als Einsteiger zunächst einen großen Bogen um ABS zu machen. Vor allem, wenn Du Gehäuseteile drucken willst, also Teile, die maßlich passen sollen. Bei ABS ist die Gefahr des Warpings sehr hoch.

    PLA ist ideal für Gehäuse - ich drucke meine Gehäuseteile nur aus PLA. Beachten musst Du nur das PLA spätestens ab 70°C wieder plastisch wird - für Teile, die z.B. der prallen Sonne ausgesetzt sind, ist es nicht geeignet.

    PLA ist nicht weicher als ABS, sondern härter. Die Festigkeit der Teile bestimmst Du mit der Wandstärke und der Höhe des Infills.

    Während Du PLA ohne weiteres in einem Wohnraum drucken kannst, ist das bei ABS nicht der Fall!

    Hier findest Du eine Gegenüberstellung von PLA und ABS:

    https://3druck.com/lieferanten-haendler/fdm-3d-druck-abs-oder-pla-sind-die-unterschiede-2020380/

    Viele Grüße

    Edited by Guest
  • Link to post
    Share on other sites

    Posted · Welches Filament für GameBoy PET,PLA, ABS?

    Wenn du später einmal ein etwas Gummi Artiges Material verwenden möchtest kannst du dir NinjaFlex anschauen (gibt aber auch noch weitere Hersteller). Jedoch ist es nicht ganz einfach damit zu drucken.

    Dies nur als kleiner Anstupser für evtl. spätere Projekte ;-)

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...