Jump to content
ultiarjan

CURA 2.3 how to : combine multi color and multi texture

Recommended Posts

Posted (edited) · CURA 2.3 how to : combine multi color and multi texture

FYI,

You know you can print dual color on your UM3 or adapted UM2, you know you can print parts of your print with a different surface (fuzzy skin), but did you know you can also combine this....

dualFuzzy.thumb.png.990213a25e8fcf162d8dcef1a87da700.png

Here's how, if you know how to setup dual printing in CURA it's pretty simple.

You need a model split in 4 STL's (or more ofc)

Just like with normal dual extrusion;

- load all models

- select all

- merge models

Set nozzle per part of the model (is color/material)

-Select a part of the model (Ctrl+click)

-Select "print model with", set the extruder to use

2select.thumb.png.fe26d8adad486aa0353acfefd3fa38b3.png

Set the part with the "fuzzy skin"

-Select a part of the model (Ctrl+click)

-Select "settings" and mark the "fuzzy skin" option

SelectFuzzy.thumb.png.3944bf75d397a001930c957daaee15c2.png

Oh, and just to be sure, as IMHO the implementation of setting alternative settings on the same extruder is not the most clear in the CURA gui, make sure NOT to select "fuzzy skin" also on the "general extruder level" as in this case you'll overrule everything and ser it for all parts printed with this extruder...

DoNOTselectFuzzyHere-allParts.png.6ed2425cfc61e4f034cbbbb1a46c4da2.png

And ofc there are nicer files to print than the test file I used, but there are not much models out there in 3  or more parts. @flowalistik published a few, but also most of his other dual extruder files are pretty easy to split into more parts using f.e. meshmixer.

here's a sample ..

FuzzyApe.thumb.png.418bbff2213c2f06386bbf3effa753ba.png

here's the file;

https://www.youmagine.com/flowalistik/designs

dualFuzzy.thumb.png.990213a25e8fcf162d8dcef1a87da700.png

2select.thumb.png.fe26d8adad486aa0353acfefd3fa38b3.png

SelectFuzzy.thumb.png.3944bf75d397a001930c957daaee15c2.png

DoNOTselectFuzzyHere-allParts.png.6ed2425cfc61e4f034cbbbb1a46c4da2.png

FuzzyApe.thumb.png.418bbff2213c2f06386bbf3effa753ba.png

Edited by Guest
  • Like 2

Share this post


Link to post
Share on other sites
Posted · CURA 2.3 how to : combine multi color and multi texture

Thanks @ultiarjan for the tutorial!

Last week I finished publishing the dual extrusion versions of all my low-poly designs. You can experiment with color mixing and fuzzy skin with them. The results are pretty funny!

Here's the link to all my designs:

https://www.youmagine.com/flowalistik/designs

And here's the result of a test with fuzzy skin. Notice that this is a print with an Ultimaker 2+, with one nozzle, only enabling the fuzzy skin feature in one of the two parts.

C0Cm_KsXUAEbReU.jpg

In all my new models the source files are available, which means you can export each part as a separate file and experiment with fuzzy skin + color mixing in just one print.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 23 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!