Jump to content
Ultimaker Community of 3D Printing Experts

Adding Profiles in Cura


JTBrown

Recommended Posts

Posted · Adding Profiles in Cura

One way to add a profile is to modify an existing one then click on the Profile drop-down and select "Create profile from current settings..." (that option isn't enabled until you change something in the current profile)

Hope this helps.

  • Link to post
    Share on other sites
    Posted · Adding Profiles in Cura

    One way to add a profile is to modify an existing one then click on the Profile drop-down and select "Create profile from current settings..." (that option isn't enabled until you change something in the current profile)

    Hope this helps.

     

    Thanks, I have done that but when I go to manage profiles there are no profiles in the list

  • Link to post
    Share on other sites
    Posted · Adding Profiles in Cura

    Ok, I think you may be running into that old Cura 2.x v 2.3.x compatibility issues. Installing Cura 2.3.x on top of an older version can cause issues.

    To test this theory, try this fix:

    Renaming old Cura Appdata folder

  • Link to post
    Share on other sites
    Posted · Adding Profiles in Cura

    Ok, I think you may be running into that old Cura 2.x v 2.3.x compatibility issues. Installing Cura 2.3.x on top of an older version can cause issues.

    To test this theory, try this fix:

    Renaming old Cura Appdata folder

     

    Thank you that done the trick.
  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...