Jump to content
PEAN

Support Problem

Recommended Posts

Posted · Support Problem

Good afternoon,

I'm here with a problem ...

Object support is exiting with the same object density.

How can I solve this problem?

Greetings,

Pedro

Share this post


Link to post
Share on other sites
Posted · Support Problem

Hi @Pean,

thank you for your post.

I was wondering, could you perhaps describe your problem a little bit more accurately? I have difficulties to understand what you mean.

My initial thought is that your support density is too high.

This can simply be lowered in Cura. What version are you using?

Looking forward hearing from you,

Share this post


Link to post
Share on other sites
Posted · Support Problem

5a33262db60da_Capturadeecr2017-01-13s16_33_24.thumb.png.6b666a5d272a5e335fec149ddc711c4d.png

I think the version will be 2.3.1.

What happens is that the holder comes out with the same thickness as the remaining object.

Where can I change?

5a33262db60da_Capturadeecr2017-01-13s16_33_24.thumb.png.6b666a5d272a5e335fec149ddc711c4d.png

Share this post


Link to post
Share on other sites
Posted · Support Problem

Hi Pean,

Next to Recommended it says custom. This is where you can find settings to change the support density.

Scroll down in the settings on the right until you see Support.

In the field Support Density you can lower the number and it will become more sparse.

If you don't see support (density) there, click on the gear next to the '▼' and type in support density. Check the checkbox and click 'close'.

It should now appear in your list. Good luck!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 23 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!