Jump to content
Ultimaker Community of 3D Printing Experts

Olsson Block on Ultimaker Original Plus?


Recommended Posts

Posted · Olsson Block on Ultimaker Original Plus?

Hi,

is there a possibility to mount the Olsson Block on Original Plus?

If NO - are there drawings/3D-Models of the block available? I would like to think about a solution to get the Olsson Block on UMO+ or think about an other solution.

Why? I read that many peoples are really satisfied with the Olsson Block, but i own an Original Plus.

Thanks for your help ;-)

  • Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    There's no need - the UMO already takes multiple nozzle sizes. Although the typical nozzles from 3dsolex are smaller/shorter so you have to relevel the bed and also the bed will hit the fan shroud so first print this:

    https://www.youmagine.com/designs/yafs-yet-another-fan-shroud-for-umo

     

    He doesn't ask if there's or not need. Also aluminum UMO heater breaks quite fast after 12-20 nozzle swaps since the aluminum threads deform very fast. That's one of the many reasons I moved my heads to um2.

    • Like 1
    Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    Hi @all,

    thanks for your replies.

    The reason why i'm thinking to "port" the Olsson Block to UMO+ is the fast and easy changing of nozzles as well as a lot of people are very satisfied with the Olsson Block.

    And it's quite easy to get, also different nozzles.

    An upgrade kit is quite expensiv, costs nearly the half of UMO+!! And i don't want to change the feeder, also dual fan is not necessary. Mostly i print ABS with fan speed (original UMO+ fan) around 30%.

    As an mechanical engineer it's not the problem to design a fitting solution, also i maybe have the possibility to get some manufactured parts. But without knowing the dimensions of the block... The other way would be buying a Olsson Block, measure the parts and then design a suitable solution. But i would like to do the other way.

    I also ordered E3D V6 Hotends. But it will take some time until i can test these...

  • Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    @neotko - are the holes in the aluminum block on UMO the same diameters as for the Olsson? I don't remember. I'm worried he might have to change out his thermocouple for a pt100 temp sensor but the pt100 temp sensor isn't compatible with UMO electronics. So does he also have to buy a whole new controller board?

    E3D V6 is great as long as you stay away from PLA.

  • Link to post
    Share on other sites
    Posted (edited) · Olsson Block on Ultimaker Original Plus?

    UMO block heater is 6mm, the thermocoupler 2.9-3mm (is less than 3mm) should fit since the pt100 enters on an olsson block & umo alu block.

    To connect a pt100 it should work with a e3d pt100 amplifier small board, but to use 24v on the 19V of the umo he might need to change some chip on the umo board, @meduza knows much more about that.

    Basically the problem could be that there are no 19V heaters of 4mm dia.

    Edited by Guest
  • Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    @neotko - are the holes in the aluminum block on UMO the same diameters as for the Olsson?  I don't remember.  I'm worried he might have to change out his thermocouple for a pt100 temp sensor but the pt100 temp sensor isn't compatible with UMO electronics.  So does he also have to buy a whole new controller board?  

    E3D V6 is great as long as you stay away from PLA.

     

    He has an UMO+ , I've always thought that has the UM2 electronics board....

  • Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

     

    @neotko - are the holes in the aluminum block on UMO the same diameters as for the Olsson?  I don't remember.  I'm worried he might have to change out his thermocouple for a pt100 temp sensor but the pt100 temp sensor isn't compatible with UMO electronics.  So does he also have to buy a whole new controller board?  

    E3D V6 is great as long as you stay away from PLA.

     

    He has an UMO+ , I've always thought that has the UM2 electronics board....

     

    Lol indeed i was confused by gr5 question. Indeed all um2 heater/pt100 works on a umo+

  • Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    Olsson block as it is doesn't fit on umo (been there trying that).

    Check the github of UM2+, there you have step files of the olsson. https://github.com/Ultimaker/Ultimaker2Plus

     

    Thanks neotko, didn't think about that ;-)

    First of all I'll try to get the E3D V6 working, then I'll decide if i think more about getting the Olsson Block on my UMO+. For printing PLA it could be still interesting...

    Thanks for your help!

  • Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    Sorry I got confused. I thought the UMO+ had the heated bed kit already. So I thought the UMO+ in the description was a typo. I personally have a UMO with HBK.

    I guess then the temp sensor is the same. But the heater is the wrong size and the wrong wattage maybe as neo says. I usually defer to neotko on UMO issues. He has I think 3 of them and uses them all every day I think for his store.

    So wattage is v^2/r where v is voltage and r is resistance. 3dsolex sells 25w, 35w, 40w, 50w heaters for UM2. Solving for r: r=v^2/w giving us 23, 16.5, 14.4, and 11.5 ohms respectively (notice higher power is lower resistance). Reversing equation again now for 19V we get: 15.6W, 22W, 25W, 31W respectively. so I recommend getting a 40W or 50W heater which on 19V will be 25W or 31W respectively. I know they have all of those values so if you can't find 50W in the online store just email them.

    • Like 1
    Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    But again, UMO+ is 24v.... ;)

    • Like 1
    Link to post
    Share on other sites
    Posted · Olsson Block on Ultimaker Original Plus?

    But again, UMO+ is 24v.... ;)

     

    doh!

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...