Jump to content
bigbbdriver

Prusa i3

Recommended Posts

Cura 2.X just slices. It won't communicate over USB anymore. So either donwload cura 15.X or use cura 2.X for the slicing step and pronterface for the printing step.

Share this post


Link to post
Share on other sites

Cura 2.X just slices.  It won't communicate over USB anymore.

 

This is not true. Cura 2.x communicates over USB to Ultimaker printers and some others just fine. There are issues connecting to some other printers, but unfortunately noone who is working on Cura has one of those printers and people who have those printers can't fix the issue.

  • Like 1

Share this post


Link to post
Share on other sites

Same problem for me with my anet A8 and cura 2.3.1 and cura 2.4. Unable to connect. My printer is not recognise!

With cura 14.07 in manually mod, i can connect with com4 and 115200 baudrate!

Why manual mod don't exist with cura?

My printer work with slic3r, simplify3d, mattercontrol...but not cura :(

Share this post


Link to post
Share on other sites

Why manual mod don't exist with cura?

 

Because it is (1) not needed for Ultimaker printers, and (2) noone with a printer that needs it is able or willing to add it to the new Cura.

I am willing to add it, but I don't have a printer that does not work with the current auto-detection. If someone wants to send me a printer, or even only a controller board to test with, I will do my best to make sure that it works with Cura.

Share this post


Link to post
Share on other sites

Not ok for send my new A8 :p but if i can try a configuration file, i'm ok!

After, 2 modifications, i can print directly with usb in cura 2.4 but cura say alway "printer not connected!"

First modification in USBPrinterOutputDeviceManager.py

Line 89:

before:

result = self.getSerialPortList(only_list_usb = True) 

 

after:

 result = self.getSerialPortList(only_list_usb = False) 

 

Second modification in USBPrinterOutputDevice.py

Line 300:

before:

programmer = stk500v2.Stk500v2()

 

after:

#programmer = stk500v2.Stk500v2()

 

source: http://mpselectmini.com/cura_2.3_usb_printing_not_working

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!