Jump to content
Ultimaker Community of 3D Printing Experts

My Ultimaker2 , Ultimaker2 ext, doesn't works well at low quality.

Recommended Posts

Hi friends,

My question is is why my Ulitimaker2 and Ultimaker2 ext is not printing well at layer height 0.15mm and 0.2mm ? at this low quality i get a very bad printing i never get it before like this king of printing quality from my Ultimaker.

while i am using latest version of cura 2.3.1 and also i updated my printers with latest firmware.

my printers working very well only at normal qality 0.1mm layer height.

please let me know how can i fix this issue?

Share this post

Link to post
Share on other sites

I have also started having problems with printing at 0.2 layer height.

I used to be able to switch between 0.1 and 0.2 without problems or having to change settings but now 0.2 has become unusable.


I have tried different materials from different manufacturers and cleaning the nozzle in case this was causing the under extrusion but it has not solved the problem.

I have also started having problems with pillowing at 0.1 on models that printed OK previously.


In view of the fact I have had other problems with Cura 2.3.1 I have reverted to using 15.04.3 however this has not helped either, which leads me to think that something that has been changed in the firmware (which I have not put back - I don't know if that is possible) is causing the problem.



Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!