Jump to content
Ultimaker Community of 3D Printing Experts
DeathMachine

New type of fail for me any help would be appreciated

Recommended Posts

Ok I've printed this part many times. the only thing differnt I limited the draft sheild at 8mm and I bumped. Last 5 mins of print out of 4 hours it starts delaminating . At this point it's just a 2mm wide wall 3mm high peeling off. I'm looking at rest of print it looks great. Have pic's will try to get them on here but for some reason now site won't let me upload pic's now?

abs temp 245 used a lot of mitus filament all of it good

fan 20%

.4 nozzle

brim 10mm

draft sheild 8mm high

Complete side note for as much light the Ultimaker 2 puts out , like the worst place in the world to take a pic of your work! What the!

Edited by Guest

Share this post


Link to post
Share on other sites

ohh, you are a fan of Die Antwoord? Cool! :)

It is quite hard to see what it is exactly that is happening. The black kinda merges into one big black object. If you want to battle delamination, it is usually recommended to print slower, thicker layers, no fan, and maybe close the front of your Ultimaker 2.

Have you tried any of these things?

Share this post


Link to post
Share on other sites

ohh, you are a fan of Die Antwoord? Cool! :)

It is quite hard to see what it is exactly that is happening. The black kinda merges into one big black object. If you want to battle delamination, it is usually recommended to print slower, thicker layers, no fan, and maybe close the front of your Ultimaker 2.

Have you tried any of these things?

 

I add it to one of those things that happens, ran that part 3 more times no problem.

Die Antwoord, I think they're freaky and I like them a lot!IMG_1115.thumb.JPG.eec120dfedde50f63188dd3c50bd3238.JPG

IMG_1115.thumb.JPG.eec120dfedde50f63188dd3c50bd3238.JPG

Edited by Guest
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Architect Design Contest | People
      The goal of this contest is to design a set of people figurines that could be used in such a project to make an area, office or mall seem populated. 
      Think of different types of people in different environments, like walking people, people standing still, working people, and both men and women.
       
      • 31 replies
    • Taking Advantage of DfAM
      This is a statement that’s often made about AM/3DP. I'll focus on the way DfAM can take advantage of some of the unique capabilities that AM and 3DP have to offer. I personally think that the use of AM/3DP for light-weighting is one of it’s most exciting possibilities and one that could play a key part in the sustainability of design and manufacturing in the future.
        • Like
      • 3 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!