Jump to content
Wisar

[Solved] Ultimaker 3 has Suddenly Decided to OOZE!

Recommended Posts

Posted (edited) · [Solved] Ultimaker 3 has Suddenly Decided to OOZE!

My UM3 has suddenly decided to start oozing after months of printing perfectly.  I am still doing some tests to try and narrow things down and will post some images later but first wondered...has anyone else seen this happen?

I am using the same materials across a UM2 that is working perfectly and my UM3.  I am getting the same result on both AA cores.  I have cleaned the extruder driver (and it needed it).  I am using the stock profiles from Cura. I am running the Beta but am pretty sure that this started before I downloaded it (test coming).  I also have S3D so that is another test coming.

I have not done an atomic clean and am wondering if I should.  Just asking the question makes me think that the answer is yes!

Any suggestions would be appreciated.

Will

Edited by Guest

Share this post


Link to post
Share on other sites
Posted · [Solved] Ultimaker 3 has Suddenly Decided to OOZE!

No I haven't experienced this.

Do your atomic pulls. I don't think this would be the cause and I never do them on mine but it will eliminate it from the back of your mind.

CURA 2.4 beta has heaps of profile changes to previous versions so I would revert back to the version you used when you first got you're UM3.

You may have to do a fresh install by deleting the CURA folders that hold all the saved profiles to remove any possible changes that may be effecting your issues.

Share this post


Link to post
Share on other sites
Posted · [Solved] Ultimaker 3 has Suddenly Decided to OOZE!

No I haven't experienced this.

Do your atomic pulls. I don't think this would be the cause and I never do them on mine but it will eliminate it from the back of your mind.

CURA 2.4 beta has heaps of profile changes to previous versions so I would revert back to the version you used when you first got you're UM3.

You may have to do a fresh install by deleting the CURA folders that hold all the saved profiles to remove any possible changes that may be effecting your issues.

 

I did a cold pull and it came out remarkably clean. I guess there is something to be said for the UM3's handling of the print core! It made no difference as expected.

I had been coming to the conclusion that I might have an issue with the Beta and had just done a test print that goes at least part way to proving that point. I am going to take your recommendation and revert back to 2.3 (clean). Are there folders hidden somewhere that I need to wipe?

Thanks, Will

Share this post


Link to post
Share on other sites
Posted · [Solved] Ultimaker 3 has Suddenly Decided to OOZE!

Reverted to Cura 2.3.1 and the problem has resolved itself!

Share this post


Link to post
Share on other sites
Posted · [Solved] Ultimaker 3 has Suddenly Decided to OOZE!

That's good. I tried to reply earlier but It wouldn't work.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 182 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!