Jump to content

Düse kleiner 0,2 am Ultimaker 2 verwenden


oobdoo

Recommended Posts

Posted · Düse kleiner 0,2 am Ultimaker 2 verwenden

Ich habe auf der Webseite http://3dsolex.com/product-category/3dprinter-nozzles/um2nozzles/ gelesen, das man kleiner 0,2mm Düsendurchmesser nicht am UL2 verwenden kann. Warum nicht? Mit 0,2 lief es mit PLA recht gut und kleiner wollte ich gerne mal ausprobieren. Aber mit dem Hinweis mag ich jetzt kein Geld riskieren ohne nachgefragt zu haben.

  • Link to post
    Share on other sites

    Posted · Düse kleiner 0,2 am Ultimaker 2 verwenden

    Ich habe es nicht probiert aber ich wüsste nicht warum es nicht gehen sollte. Vielleicht bezieht sich 3dsolex darauf dass es für kleinere Düsen keine Standardprofile in Cura gibt (siehe screenshot). Aber ich mit genug Gebastel, wird es vermutlich doch gehen.

    5a3327bf0d227_ScreenShot2017-02-27at16_50_04.thumb.png.237c6ce55cdde6ac006d10ddc01d68c3.png

    5a3327bf0d227_ScreenShot2017-02-27at16_50_04.thumb.png.237c6ce55cdde6ac006d10ddc01d68c3.png

  • Link to post
    Share on other sites

    Posted · Düse kleiner 0,2 am Ultimaker 2 verwenden

    Hallo @oobdoo,

    Ich glaub das bezieht sich auf der Feeder, also mit der UM2+ Feeder, oder einen modifizierten UM2 sollte es gehen!

     

    Nur für Fachleute. Benötigt gezahnte Zuführung. (Bondtech, Iroberti / Meduza, UM2 +).

    SIE werden NICHT in der Lage sein, dieses Element mit einem Original UM2 zu verwenden.

     

    Übersetzt mit google

    Ich habe gar nicht gewusst das die Matchless Düsen rückwärts kompatibel mit den "Olsson Block" sind.

  • Link to post
    Share on other sites

    Posted · Düse kleiner 0,2 am Ultimaker 2 verwenden

    Hallo @oobdoo,

    Ich glaub das bezieht sich auf der Feeder, also mit der UM2+ Feeder, oder einen modifizierten UM2 sollte es gehen!

     

    Nur für Fachleute. Benötigt gezahnte Zuführung. (Bondtech, Iroberti / Meduza, UM2 +).

    SIE werden NICHT in der Lage sein, dieses Element mit einem Original UM2 zu verwenden.

     

    Übersetzt mit google

    Ich habe gar nicht gewusst das die Matchless Düsen rückwärts kompatibel mit den "Olsson Block" sind.

     

    Seit ich meinen Feeder umgebaut habe (siehe Thingiverse) habe ich da kaum noch Probleme mit gehabt, auch nicht mit 0,20mm. Warum sollten die Düsen nicht funktionieren? Mir hat man hier auch gesagt das MaPa nicht passen und doch laufen die gut bei mir (0,2/0,4).

  • Link to post
    Share on other sites

    Posted · Düse kleiner 0,2 am Ultimaker 2 verwenden

    The little nozzles 0.15 and smaller need a geared feeder, thats why they do not work with an Um2. The Um2 + has a geared feeder and works! The direct drive feeder of the Um2 has too crude steps, so dont expect a nice print with the feeder "makes a move every minute".. remember the small nozzles use extrenely little filament!

    A Bondtech or other geared feeder has a higher resolution, and will work much more evenly!

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...