Jump to content
Ultimaker Community of 3D Printing Experts

U3 Stops to print randomly while printing with WIFI


esteban-pacheco

Recommended Posts

Posted · U3 Stops to print randomly while printing with WIFI

This is only happening when WiFi printing?

Is cura running&monitoring the printer when this happens?

Does the menu on the printer still respond?

If the menu responds, what happens if you try to tune the temperature?

Can you send me the log files after this happened? Instructions:

 

  • Wait for the problem to happen
  • Restart the printer
  • Insert an USB drive
  • Goto the maintenance->diagonstics menu, select "dump logs to USB"
  • It will create a file on the USB drive, send me a copy

 

  • Link to post
    Share on other sites
    Posted · U3 Stops to print randomly while printing with WIFI

    This is only happening when WiFi printing?

    Is cura running&monitoring the printer when this happens?

    Does the menu on the printer still respond?

    If the menu responds, what happens if you try to tune the temperature?

    Can you send me the log files after this happened? Instructions:

     

    • Wait for the problem to happen

    • Restart the printer

    • Insert an USB drive

    • Goto the maintenance->diagonstics menu, select "dump logs to USB"

    • It will create a file on the USB drive, send me a copy

     

     

    hey Daid: im using Cura 2.4 and the Firmware is the last stable version

    - 1) until now it only happened while WIFI printing.

    - 2) Yes, cura was Monitoring the Printer

    - 3) the Printer doesnt respond, ist frozen.

    - 4) since the Printer is frozen, any reading is impossible.

    - 5) im going to send the logs, i have to wait for the Problem to happen again, it is random.

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...