UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
M302 not working. Any ideas? Printing with PCL at 130 °C and PVA as support
Posted
· M302 not working. Any ideas? Printing with PCL at 130 °C and PVA as support
Thank you Daid!
When printing a model with a single material yesterday one M302 command at the start of the Gcode did the job, so I got the feeling that it had something to do with the hotend change.
I started a small print of 15 layers in which i added M302 after each T0 and now I have extrusion on every layer with both extruders. So it works!
I just started a larger print of 378 layers, so we will see how it turns out.
Thanks again for the quick answer!
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
(Sorry, was out of office when this released)
This update is for...
All UltiMaker S series
New features
Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
Recommended Posts
Daid 306
After a T0 or T1 you need to use M302 again, as the hotend lifting code is disabling and enabling the minimal extrusion temperature.
Link to post
Share on other sites
Tsn 0
Thank you Daid!
When printing a model with a single material yesterday one M302 command at the start of the Gcode did the job, so I got the feeling that it had something to do with the hotend change.
I started a small print of 15 layers in which i added M302 after each T0 and now I have extrusion on every layer with both extruders. So it works!
I just started a larger print of 378 layers, so we will see how it turns out.
Thanks again for the quick answer!
Link to post
Share on other sites