Jump to content
Ultimaker Community of 3D Printing Experts

No Support Test-2Color Print-UM3+


Recommended Posts

Posted (edited) · No Support Test-2Color Print-UM3+

My first 2 Color Print with massive overhangs and no supports. A bit of cleanup required to remover a bit of underside strings, but really impressed.

Settings in Cura 2.4

Basic Draft for PLA (Both Colors)

2 walls

Hollowed out

Make overhangs printable (65°) (found by doing overhang tests prints. 65° is where I found I get a decent bottom and top.

Coasting enabled (Default settings)

0.1 expansion on both colors to make them overlap a bit and bond better.

2CLRFactalFlower.jpg

Tape dispenser for scale

2CLRFractScale.jpg

In me tiny hands

JustOffTheBed.jpg

Some Teacandle tests each 'lamp' printed with no support (single color only) Just throwing them in to save multiple posts

TeaCandle.jpg

Still greatly in the newbie phase, but the machine is very robust and compensates a lot for this clumsy noob.

Edited by Guest
  • Like 1
Link to post
Share on other sites
Posted · No Support Test-2Color Print-UM3+

The print was 18.6 Hr by estimation and I could swear it shaved an hour off...or the daylight savings change messed me up. Gonna be cold and tired for a few days until the blizzard is done and I adjust to the time change...grooooaaaaannnnnn.......

I have not tried without the prime tower. The stringies are from where it was building the overhangs. And amazingly, few if any. Most of the 'rougher surface' was on the most bottom part of the fractal. A snip and sanding a bit did the job for me.

The thing I am most amazed at is that it has gazillions of overhangs and still came out this clean. The 'petals' of the fractal are smooth as can be. I'll probably try without the prime tower and use the ooze shield.

I will be remaking/revising it to make an LED Lamp some time in the future. When I am not experimenting with materials and such. Had it for two months and all I've done is print a bunch of cubes, some old files and interlocking ball and socket test pieces.

Been also painting and testing finishes. For instance, I have decided I am not a fan of ABS for a variety of reasons. For my goals, just too brittle. But I do love the PLA and nylons. NinjaTek's products (Semi-flex, flex, cheetah) are giving me no issues other than finding the sweet spot in temps.

Gonna be trying armadillo soon to see how it compares to ABS in strength and hopefully not as brittle.

This machine is the perfect learning tool. Compensates enough for this clumsy noob and STILL allows for playing around.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 4 replies
    ×
    ×
    • Create New...