Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  
mrjohnk

PID Autotune

Recommended Posts

Since I'm getting ready to update my firmware to the latest Marlin version, I wanted to go ahead and do another PID autotune on the hotend so that I can get a better performance. I'm running a 24V power supply and printing ABS. Using default PID settings work, but the hotend overshoots the 255 degree temperature upon initial heat-up to about 265, but holds good at 255 after that. The goal is to reduce the initial overshoot. Using the pronterface GUI, below is the output I received. Any idea what caused it to fail the autotune?

Thanks.

John

SENDING:M303 250

PID Autotune start

ok T:46.42 @:127

ok T:46.42 @:127

ok T:46.91 @:127

ok T:48.34 @:127

ok T:50.05 @:127

ok T:52.61 @:127

ok T:55.66 @:127

ok T:59.57 @:127

ok T:63.66 @:127

ok T:68.27 @:127

ok T:73.21 @:127

ok T:78.58 @:127

ok T:83.89 @:127

ok T:89.32 @:127

ok T:95.21 @:127

ok T:100.92 @:127

ok T:106.60 @:127

ok T:112.30 @:127

ok T:118.32 @:127

ok T:124.11 @:127

ok T:129.82 @:127

ok T:135.44 @:127

ok T:141.42 @:127

ok T:146.94 @:127

ok T:152.31 @:0

ok T:157.96 @:0

ok T:162.78 @:0

ok T:166.99 @:0

PID Autotune failed! Temperature to high

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!