Jump to content
Ultimaker Community of 3D Printing Experts
kmanstudios

The Noobverse with an observation about hardware and effects of tiny changes

Recommended Posts

This is not a complaint. All things have been handled quite well. But I wanted to pass along a sort of 'Butterfly effect' that happened when I replaced parts.

When I got my Ultimaker 3+, the feeders were odd. The tension indicator never moved and I could not understand why.

I had to take apart Feeder 2 and, without knowing what I was doing, I sproinged out a small piece or two that affected that feeder. But, feeder 1 was not adjusting properly as well.

The good people at Support (Ultimaker and FBRC8), have replaced my Feeder 2 and the Fan guard that I bent also. Both issues were replaced even though I messed up the parts.

I changed the feeder last night. Before doing so, I opened it up carefully to see what it should look like on the inside as it would adjust the tension indicator properly. I wanted to see how it was supposed to be on the inside.

What I found was the feeders were not properly assembled from the suppliers. For instance, both tension screw adjusters were on the outside and not inside.

I made my feeder 1 match the new feeder 2 assembly and replaced the feeder 2 on the machine.

So, the long winded setup is to state that it made a huge difference in how my material feeds and thusly, my presets I had been calibrating as I could properly adjust the tension for the differences in filaments, either by type of manufacturer.

Therefore I spent from about 10PM until 3AM resetting and testing the new setup to remake a preset. And it made a difference.

Little changes can make a huge difference.

Just passing this along for all the noobs trying to dial in new settings. Keep the hardware in proper shape as it really is small differences that make a difference.

I have not replaced my print-head cable or fan guard yet. Wonder what affect it will have as well. :)

Edited by Guest

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Introducing Ultimaker Cura 3.6 | Beta
      Ultimaker Cura 3.6 | Beta is available. It comes with new features, bug fixes, and UX improvements. We would really like to have your feedback on it to make our stable release as good as it can be. As always, you can download the beta for free from our website, for Windows, MacOS, and Linux.
        • Like
      • 91 replies
    • Print Core CC | Red for Ruby
      Q: For some users, abrasive materials may be a new subject matter. Can you explain what it is that makes a material abrasive when you are not sure which print core to use?
      A: Materials which are hard in a solid piece (like metals, ceramics and carbon fibers) will generally also wear down the nozzle. In general one should assume...
        • Like
      • 30 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!