Jump to content
jnoun11

probleme cura2.5 veut pas demarrer...demande un disque...

Recommended Posts

Posted · probleme cura2.5 veut pas demarrer...demande un disque...

salut toutes et tous

j ai installer cura2.5 , premier lancement sous windows 8,1 64 bits sans probleme, je lance un print sur ultimaker 3 extended, jusque la genial...mais ensuite apres avoir refermer le programme plus moyen de le relancer, a chaque fois une erreur comme celle citee sur ce topics anglophone qui n a pas trouver non plus de solution.

https://ultimaker.com/en/community/38971-cant-run-cura-240

le meme message s affiche a chaque fois: inserer disk d....

quelqu un a t il eu le meme probleme ? j ais desinstaller toutes les vieilles versions de cura au cas ou cela viendrait de la mais ca ne marche pas.

merci d avance

Share this post


Link to post
Share on other sites
Posted · probleme cura2.5 veut pas demarrer...demande un disque...

bonjour toutes et tous

j ais trouver le problème, cura ne se lance pas si il y a une clé USB genre clé pour l internet qui a D pour identifiant de lecteur.

en retirant la clef et en lançant cura , tout va bien. il suffit ensuite de remettre la clef si on en a besoin.

Share this post


Link to post
Share on other sites
Posted · probleme cura2.5 veut pas demarrer...demande un disque...

C'est ce que disait @nallath

 

I just checked. Cura constantly checks for removable drives. Windows tells cura that that drive is a removable drive. When cura tries to open it, windows gives an error, which Cura never hears about.

Renaming the drive should resolve the issue (I know, it's a weird & stupid solution...)

 

Share this post


Link to post
Share on other sites
Posted · probleme cura2.5 veut pas demarrer...demande un disque...

salut toutes et tous

j ais desinstaller tout ce qui concernait les anciennes versions de cura, nettoyer le registre a l aide de regedit. puis j ais reinstaller cura 2.5...et tout marche a merveilles.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 46 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!