Jump to content
Ultimaker Community of 3D Printing Experts

json 'str' data type issue - PPP


DaHai8

Recommended Posts

Posted · json 'str' data type issue - PPP

In Post-Processing Plugins, if I use the 'str' data type for an input field, it appears to disable that field if there is nothing in it:

 

#               "line1":               {                   "label": "First Line",                   "description": "First Inserted Line",                   "type": "str",                   "default_value": "This",                   "enabled": true               },

 

If I set the default_value to "", then I can't type anything into that field in the PPP. If I leave it as 'This', I can type into the field. If I delete all the characters, then it locks the field and I can no longer type anything into it...except a period (.) and only a period - nothing else even after that.

Am I missing something?

Cura 2.5 windows 10

  • Link to post
    Share on other sites
    Posted · json 'str' data type issue - PPP

    I have a hunch that you can type numbers, right?

    Silly me, didn't try that.

    Yes, I can type numbers any time.

    I can type letters in fields that already have letters.

    But once its blank, only numbers and a decimal/comma are allowed.

    So if I want to have a field that I can enter gCode into, what should I 'type' it to?

    Thanks!

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...