Jump to content
Ultimaker Community of 3D Printing Experts
yellowshark

2.4 release cooling/minimum layer time and "Lift head" problem

Recommended Posts

Hi This is something I rarely encounter but on this model, which I have to print this week-end is below minimum print time at the top and is suffering. I selected the option to Lift Head and when the model prints the head moves to the side as instructed but filament oozes out and then gets dragged across the model when the head moves back to print the layer. Is there a way to prevent this? I am sure I did this once under 15.n or 14.n and do not remember having this problem, maybe I am wrong on that.

Yes I know I can print a tower to raise layer print time and get around it that way but this will increase print time and cost my customer more.

I guess I do not understand why a retraction is not done when Lift Head is requested.

Share this post


Link to post
Share on other sites

Why still using Cura 2.4? Many bugs have been fixed since then.

I tried in the v2.6 Beta release and the generated gcode looks fine to me (comments at line ends added by me):

;Small layer, adding delayG1 F1500 E42.0107                   ; Do a 6.5mm retract.G0 F15000 X117.102 Y107.99 Z10.67   ; Move down 3mm G0 X101.587 Y95.362                 ; move asideG4 P1404                            ; wait 1404 ms

 

The 6.5mm retract is specified in the Cura setting 'Retraction Distance'.

Share this post


Link to post
Share on other sites

Thanks for the detail @Indy31,all that takes your time. Lol well if the release notes had something about it I would have upgraded but I did not see anything and I would rather stay with stable rather than Beta software in our production system unless needed.

Is it automatic or is there a setting to be set to cause the retraction.

Anyone know if this was fixed in 2.5 or was it 2.6?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Introducing Ultimaker Cura 3.6 | Beta
      Ultimaker Cura 3.6 | Beta is available. It comes with new features, bug fixes, and UX improvements. We would really like to have your feedback on it to make our stable release as good as it can be. As always, you can download the beta for free from our website, for Windows, MacOS, and Linux.
        • Like
      • 95 replies
    • Print Core CC | Red for Ruby
      Q: For some users, abrasive materials may be a new subject matter. Can you explain what it is that makes a material abrasive when you are not sure which print core to use?
      A: Materials which are hard in a solid piece (like metals, ceramics and carbon fibers) will generally also wear down the nozzle. In general one should assume...
        • Like
      • 30 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!