Jump to content
DevWolf

Cura causing skipped X and Y steps - identified specifically to Cura slicer

Recommended Posts

Posted · Cura causing skipped X and Y steps - identified specifically to Cura slicer

I've been in rapid prototyping on FDM for almost 7 years now and I've noticed something with Cura that none of the other slicers seen to cause.

Same print, same settings, across different slicers - something seems to be going on within Cura that's causing the X and Y skips, seemingly related to accelleration.

Before I start, I want to note that one of the issues identified was when you use a Sailfish machine with it. The fan code for Marlin is the "disable acceleration" (m127), so before going forward, to rule this out, ice changed it in the gcode to m126 (instead of the m127 T0 that cura tried to use), which enables acceleration in Sailfish. So firmware acceleration is turned on, and I have it turned down inside the firmware to settings that I know to work with my machine across any scenario I throw at it.

The problem seems to affect, speciffically, small circles and gap filling. The steppers jerk violently and rapidly in these areas and it causes skips. No other slicer displays this issue. I can even boost the speed in other slicers and still can't reproduce it. In Cura, I have to turn print down by nearly 50% to get any kind of security in leaving a Cura print by itself while it does it's thing.

Id like to bring this to the attention of the development department for in house testing to see if the problem can be tracked down. This has affected both Cura 1 and 2, through all builds so far. I've done some heavy research into the issue on forums and the like, and I see that even the UM2 machines do this. Now, you might be saying things like "lube the axis, fix that pulley, tighten the belts, driver current, z hop, etc, etc.." let me assure you that I know these issues well, and have learned the hard way over the past 7 years. None of the typical problems seem to cause it. I spent nearly a year now dealing with this nightmare and have yet to find a mechanical electrical issue as the culprate. I'm familiar with calipers on filament for the average, volumetric to temperature balancing, etc... And I can find nothing wrong with the settings I use, which have been changed to a wide range of differences and not solved the issue. I've done the same in slic3r, kiss, makerware, repitere host, and even mPrint from mBot. Cura is the only slicer that Can reproduce this issue.

Can someone please take a look at this?

Share this post


Link to post
Share on other sites
Posted (edited) · Cura causing skipped X and Y steps - identified specifically to Cura slicer

Post some pics about what you are on about, if it is the missed step issue causing ringing and weird patterns this has been noticed. I use a UM2 though and can leave my prints after 2 mins of baby sitting. I print small to medium sizes and don't really have any real issues. This stepper issue is my only one at the mo but that didn't even get changed with the UM3, so just curious to see if its the same thing as you? I've only been doing this for 3 years but am a perfectionist so study my prints very closely.

Edited by Guest

Share this post


Link to post
Share on other sites
Posted · Cura causing skipped X and Y steps - identified specifically to Cura slicer

Hi, could you please post a link to a simple model that exhibits the problem you are troubled with. Having the badly behaved gcode for that model would be useful too.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!