Jump to content
iods

axes dont move

Recommended Posts

Posted · axes dont move

HELLO MY DEAREST 3D MASTERS

i just finished the assembling of my 3d printer..original+ but when i select the auto home the axes are not moving, only the bed. i double checked my cables and everything looks fine.

any idea?

thank you in advance

Share this post


Link to post
Share on other sites
Posted · axes dont move

Welcome!

Pictures of the electronics board, please?

Do the motors make a noise as if they're trying to move and failing, or does it not sound like they're trying to move at all?

Share this post


Link to post
Share on other sites
Posted · axes dont move

Hello,

I had this problem once.

Is it possible to invert the motor cable of your table with that of one of the X or Y axis motors? This test can verify the integrity of the cables, motors and drivers on the board.

Hope to hear from you.

Share this post


Link to post
Share on other sites
Posted · axes dont move

Well guyz the motors are making a mini-noise when im choosing the auto home but then only the bed is moving (is going up) the axes are not moving at all and the blue screen is showing ultimaker ready.

im sending you some pictures to help me out

if you notice any problem please let me know

thanx for you time hope i can finally use my 3d printer.

cheers

19198599_10208805915964432_1565236851_n.jpg?oh=1da7d743e841e7cf5a9c44d75107da53&oe=5943513919238461_10208805915484420_1375799006_o.jpg?oh=80adeeb7b03950fae2e70aa3eb4912b6&oe=5944575219142349_10208805915644424_1580341485_n.jpg?oh=cce7c5d89d39fed8cecbaeb59e010708&oe=5944381219205112_10208805915524421_1240290290_o.jpg?oh=0e3bd2505e9212b5d948ab5b00264a56&oe=59434C8D19190750_10208805915804428_1033879378_n.jpg?oh=6400942bad2a886d51b7755c9c30f4d3&oe=59436A68

Share this post


Link to post
Share on other sites
Posted · axes dont move

I tried again the auto home and before that i ex-change the x with the y axes on the cables of the motors back on the board. the monitors are shaking but the washers are not doing any movement so the axes again are not moving at all

:/

Share this post


Link to post
Share on other sites
Posted · axes dont move

If your motors sound like they're trying to move, but the printhead isn't going anywhere, I'd double check that your pulleys are all tight on the motors and the rods.

Share this post


Link to post
Share on other sites
Posted · axes dont move

19190750_10208805915804428_1033879378_n.jpg?oh=6400942bad2a886d51b7755c9c30f4d3&oe=59436A68

The short belt is toooo loose. Unscrew a bit the 4 screws, push it down and tighten it again (while you keep pushing down).

  • Like 1

Share this post


Link to post
Share on other sites
Posted · axes dont move

Hello,

Could you check if, when you 're moving the head in x and y direction ,with your hand, you turn your x or y motor?

This operation can help you to check all the mechanical link.

Hope to hear from you.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!