Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · UM3 x axis moves

5a333c24d7a74_UltimakerXaxle.thumb.png.11cff58347dd80a1062f8fcaf15e5b6c.png

On the picture I tried to show what goes wrong:

The X axle can move left and right very easy in its holder in such a way that it can touch the side of the UM leaving a scratch (see right arrow). This off course influences the print.

The axle left-right movement is probably caused by a crack in the holder it’s hard to see but the left arrow is pointing on the crack. Both axle holders have this crack. The axe comes out of the holder very easy because of all this.

Is it possible to replace the two holders? I could not find them in the spare parts shop.

Off course you might also be wondering how those cracks came in there in the first place. I think they are there for a while know, because a year ago something went wrong and the print head got full of material and was kind of exploded. I however am not sure that the cracks where there since….

What else could have caused these cracks in the holders? And what keeps the axle from not moving left and right (I am now assuming the holders)?

thanks!

5a333c24d7a74_UltimakerXaxle.thumb.png.11cff58347dd80a1062f8fcaf15e5b6c.png

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...