Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Hi All,

I've just bought a used UM2, it seems to be in pretty good condition and other than a self-printed filament feeder - it looks totally original.

Just wondering what the best upgrades would be? It looks as though the nozzle is a bit rounded-off? Is it worth me spending the £400 and buying the genuine extrusion upgrade kit? Is it best to leave it standard, or is there a better option out there?

I'll be mainly making boxes for small optical devices, so probably ABS and PLA although I'd like to try nylon/CF at some point.

I've got a lot to learn, but I might as well start by bringing it up-to-date in terms of improved hardware.



Share this post

Link to post
Share on other sites

Hi @Johnyboy,

It is hard to determine on what areas your printer would need some attention, but in general a new extrusion upgrade just kinda gives you a brand new Ultimaker 2+. It contains almost all crucial parts you need. From the rods, to the extruder, the bowden tube and a complete assembled printhead.

If you want to print ABS, I would also look into a door or enclosure. This can be very DIY (cardboard door), something like our advanced 3D printing kit or a full third party enclosure. But with the latter, keep in mind that you do not want to overheat the electronics, if you are going to enclose it completely.

Share this post

Link to post
Share on other sites

I would definitely get the extrusion upgrade kit. It addresses all the problems areas that the UM2 had and gives you the ability to swap out the nozzles to print CF and so you can use different sizes for different applications.

Share this post

Link to post
Share on other sites

Right, I hope this doesn't double-post, as I forgot to click the "i'm not a robot button" last time.

Thanks for the advice, I'll have a look at the kit to see what the lead-time in the UK is at the moment. I'll also get a piece of polycarbonate order to knock-up a quick door.

Thanks again


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!