Jump to content

Control the extruder by Gcode line by line

Recommended Posts

Posted · Control the extruder by Gcode line by line

Hi, everyone!

I am trying to send the Gcode to Ultimaker and observe the motion corresponding to each Gcode.

Thus, I have some question to ask. First, the description of the connection about the Ultimaker is like that 'standalone via USB-drive'. Does that mean the only way of the USB port is to insert USB flash disk or it can be used to connect to PC so that I can test and debug it.

Second, how can we control the mechine by Ethernet? Does anybody start to control it by matlab or other IDE and send the code to the mechine by Ethernet or other way successfully?

Looking for your answer and thank you very much!!!

Share this post

Link to post
Share on other sites
Posted (edited) · Control the extruder by Gcode line by line

several vague questions here, I'm not sure what you are trying/want to do, perhaps you could try and explain that  a bit better?

you ca send print jobs from Cura.

you can control the printer, printhead position, print jobs, case lighting, more etc. from the REST web API

the documentation for that is available on the printer by browsing to: /docs/api/

you can also enter developer mode(makes your printer extremely insecure, hidden in the diagnostics menu) and talk to the services directly via dbus once you log in via SSH.

you can give some of that a try by logging in as the ultimaker user, in that command shell you can at least send gcode to the motion controller directly.

I hope that helps, otherwise please try to be a bit more specific...

Edited by Guest

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 48 replies
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!