Jump to content
Ultimaker Community of 3D Printing Experts

Printing Only Brim


llop5
 Share

Recommended Posts

Posted · Printing Only Brim

Hi, I am using an Ultimaker 2+ to make really thin film-like objects, and the brim that is generated by Cura is almost exactly what I am trying to make. I have tried messing around in Cura by making thin CAD models with different infill patterns, but I can't get the same printing pattern.

I'm sure this isn't asked often, but is there a way of making about a 1 cm x 1 cm square of just brim?

  • Link to post
    Share on other sites

    Posted · Printing Only Brim

    I have printed 10mm x 10mm x 10mm test cubes in that way: just set the wall thickness to more than 5mm indeed (in my case), and it spirals layer per layer. Then it prints only walls without infill, until the whole object is filled with wall. If your object would be larger than 10mm diameter, adjust wall thickness accordingly.

    However, the center of the spiral does not come out well: the nozzle stays too long in that little area, develops too much heat, and it has to slow down too much to go around the tight corners. This results in ugly blobs and overextrusion in the center of the spiral. The rest is okay. Printing multiple test blocks at the same time helps a bit of course, but does not eliminate the effect.

    So I prefer the diagonal infill pattern.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...