Jump to content
Preb1

NOTHING IS WORKING"#!"!#¤!#¤

Recommended Posts

Posted · NOTHING IS WORKING"#!"!#¤!#¤

The UM3 won't work with USB, neither connect via WiFi or LAN.. Every time I try to run wifi setup I get thrown back to the main menu. Same thing happens when I try to push print with usb..

Just bought the printer and it has been working for a while over wifi only, but I lost connection frequently during prints.. It has never worked via lan cable..

I tried to run a firmware update (stable version) and it only got worse, now it won't work at all..

please help?!

Log: https://pastebin.com/Rk0iGdz8

Share this post


Link to post
Share on other sites
Posted · NOTHING IS WORKING"#!"!#¤!#¤

Does it at least give you the menu system on the front panel? Or does it not even boot? If you have the menu system - put it into developer mode and then connect it to wired (I hate wireless in general) ethernet. The screen will tell you the printer's IP address within a few seconds after you connect the cable.

However it sounds like maybe during the firmware upgrade it didn't do a full upgrade and now it's "bricked"? The only fix from that state (if that is the current state) is to take the bottom cover off and insert an SD card that already has the correct operating system software installed. then you turn on power and that will load in a new operating system. It can take 5 to 20 minutes depending on how fast the SD card is.

Anyway you should contact your reseller as no one on the forum has posted a link to the iso file that needs to go onto the SD card. I have a proprietary one but you definitely don't want that version of the firmware.

Share this post


Link to post
Share on other sites
Posted (edited) · NOTHING IS WORKING"#!"!#¤!#¤

The machine fails to start because it has no MAC address programmed. That's also why the LAN connection failed.

Please contact your reseller.

Edited by Guest

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 11 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!