Jump to content

Température de base PLA trop chaude


justinvl

Recommended Posts

Posted · Température de base PLA trop chaude

Hello.

Hier en remarquant que j'avais pas mal de stringing entre les supports d'une impression, je vais dans le paramètre de l'imprimante pour diminuer la température et là je vois qu'il m'avait mis 230° comme température par défaut en PLA.

Le jour avant la température était de 210° par défaut, comme depuis toujours. Et là du jour au lendemain ça me donne 20° de plus...

J'ai été dans les paramètres de Material et j'ai bien re-cliquer sur PLA, mais ça me donne toujours 230°

Je ne comprends pas. Je n'ai touché à rien entre temps pourtant...

Alors pourquoi diantre ce changement?

  • Link to post
    Share on other sites

    Posted · Température de base PLA trop chaude

    Et pour illustrer les propos d'@electromu, le profil de base pour une UM2+

    [material]

    name=PLA

    temperature=210

    temperature_0.40=210

    temperature_0.25=195

    temperature_0.60=230

    temperature_0.80=240

    temperature_1.00=240

    bed_temperature=60

    fan_speed=100

    flow=100

    diameter=2.85

    Conclusion : tu as changé de diamètre de buse dans CURA entre avant-hier et hier.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...