jaiboot 0 Report post Posted August 15, 2017 in Interface calculation in cura (edited) Hello all, I have some questions/ concerns about how interface material is generated in Cura. What it looks like right now is that the interface is generated at a constant distance in z off of the overhanging structure. Here is a picture of what I mean. https://drive.google.com/file/d/0B_xOKKb7IzNCbE1qaDVRWm9xUm8/view?usp=sharing When my interface layer thickness decreases to something around 0.5mm, the support interface completely disappears on shallow angles. https://drive.google.com/file/d/0B_xOKKb7IzNCMTRzbjB4OWlYZDg/view?usp=sharing Here is a link to the part I'm using. Let me know if this all makes sense. https://drive.google.com/open?id=0B_xOKKb7IzNCQXNBU3RtYzZSRDg Thanks! Edited August 15, 2017 by Guest Share this post Link to post Share on other sites