Jump to content
Ultimaker Community of 3D Printing Experts

The Mark 2 Modification is it still supported


Recommended Posts

Posted · The Mark 2 Modification is it still supported

Have slowly gathered all parts except for wiring , to do the Mark 2 Mod, I use s3D will this mod work with this software, or am I forced to use Cura,, I notice that it seems to have died down from the initial rush of Blood, which I think is a pity.. is there still development on this mod before I hack my UM2.. just want to be sure it will work and be something that is being developed.

  • Link to post
    Share on other sites

    Posted · The Mark 2 Modification is it still supported

    Sure. Everyone involved is still around. Ofc everyone has a day job.... But you can safely go one with the mod.. even if you would have to wait a while for an answer your single extrusion ability stays just as is.

    And yes you can use s3d.

    And also... Yes there is still development. Did you see the zge version?

  • Link to post
    Share on other sites

    Posted · The Mark 2 Modification is it still supported
    just make sure you have an Ultimaker mainboard with 5 stepper drivers installed.but

    Don't really get that, are you saying make sure I have a spare board in case I blow it OR are you saying count the drivers and make sure it original UM board??

    5a3316050d7a3_Circuitboard.thumb.JPG.b068d24d60b30cc28dd0e91034137ecc.JPG

    this was My mother board last time I had it to bit's.

    And also... Yes there is still development. Did you see the zge version?
    no I have not seen that version, is it better ??
  • Link to post
    Share on other sites

    Posted · The Mark 2 Modification is it still supported

    Your board is fine. Some of the newest um2 are missing components of the 5th stepper driver. Ultimaker claims they had to do that due to lack of components.

    But your board is fine. You can see it has solder at the back where the 5th driver is.

    For the zge... It looks assom but is a much bigger makeover... I suggest you try the normal Mark2 first. Search for zge mark2 on this forum for more info... (On my phone... To hard to find a link..)

    • Like 1
    Link to post
    Share on other sites

    Posted · The Mark 2 Modification is it still supported

    and the link to the MARK2 ZGE topic;

    https://ultimaker.com/en/community/50948-zge-mark2

  • Link to post
    Share on other sites

    Posted · The Mark 2 Modification is it still supported

    ultiarjan

    thanks for that I will take your advise and stick to the plan of the Mark 2.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...