Jump to content

2 Teile drucken, aber nur bei einem will ich Stützmaterial


danielfrei

Recommended Posts

Posted · 2 Teile drucken, aber nur bei einem will ich Stützmaterial

Hallo,

ist es möglich 2 unterschiedliche TEile zu drucken, aber nur bei einem Stützmaterial zu verwenden?

Ich hab 2 verschiedene Teile. Das eine braucht Stützmaterial weil es zu große Überhänge hat, das andere ist ein runder Zylinder der eine Bohrung quer drin hat und bräuchte eigentlich kein Stützmaterial. Trotzdem setzt mir Cura da immer Stützmaterial hin, bis ich an der Bohrung vorbei bin.

Als Stützmaterial nimm ich PVA mit dem 2. Extruder. Cura hab ich grad 2.6.2 drauf.

Gruß

Daniel

  • Link to post
    Share on other sites

    Posted · 2 Teile drucken, aber nur bei einem will ich Stützmaterial

    Ja das ist möglich. Wenn es zwei unterschiedliche Modelle sind, dann kannst du in Cura mit den "per object settings" den Support zuweisen.

    Wenn es nur ein Modell ist wobei einige Bereiche keinen Support haben sollen, dann wird es aufwändiger aber es ist auch möglich.

    Für den einfachen Fall, schau dir die "per object settings" an.

    5a333ef0f2403_ScreenShot2017-08-30at14_05_35.png.be5c75007b085e2b46cffe9a88c4fa07.png

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...