Jump to content

Missing layers in Gcode-File


lemy

Recommended Posts

Posted · Missing layers in Gcode-File

Hello @all,

I have the following Problem : I try to print out a 3D-Model of a Car but everytime I generate the GCode-File there are missing layers. after layer 226 there are 10 layers fullfilled like Bottom/Top, following by 10 empty layers and following again 10 fullfilled Layers. In a second Object the Layers are all good.

Any Idea what the Problem is ?

I have uploaded a ZIP-File with the STL- and GCode files and a Screenshot from Cura 2.6.2.

I Try it in Cura 14.07 and 2.6.2 but both the same problem.

My Settings : 0.1 mm layerthickness, 1mm Shell, 30mm/s printing speed, 1.75 filament, 10% fillment

Download files

Best Regards

  • Link to post
    Share on other sites

    Posted (edited) · Missing layers in Gcode-File

    Just noticed that the skirt doesn't go around the car, it goes under it!

    EDIT - just noticed that's OK because the car body rises above the build plate.

    Edited by burtoogle
  • Link to post
    Share on other sites

    Posted · Missing layers in Gcode-File

    I used the "Keep Disconnected Faces" Cura option and it sliced better:

    Screenshot_2017-09-04_18-35-20.png?raw=1

    I 've tried it but the Gap is still there. if you rotate the Model you will see it too.

  • Link to post
    Share on other sites

    Posted · Missing layers in Gcode-File

    I used the "Keep Disconnected Faces" Cura option and it sliced better:

    Screenshot_2017-09-04_18-35-20.png?raw=1

    I 've tried it but the Gap is still there. if you rotate the Model you will see it too.

    I tried it second time and now it looks better :-)

  • Link to post
    Share on other sites

    Posted · Missing layers in Gcode-File

    Good, but remember, the model is badly broken. You need to fix it to be able to reliably print from it.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...