Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

I've read up on all the pros and cons of the food safe materials, how to treat them, what to use them for, and not, etc. What I don't know is if the material it Ulti V3 core compatible.

Have any of you any advice or experience with food safe material you could share?

Many thanks.

  • Link to post
    Share on other sites

    As far as I can see, no FDM 3D-printed model is food-safe: they all contain little holes where food rests can accumulate, and bacteria can get a good grip, so you can't wash them out.

    I think the printer nozzles are not going to be the problem: they operate at +200°C: not much bacteria are going to survive that. And the wear is very low, otherwise there would not be a nozzle at all anymore after a few meters of printing filament...

    Wood-filled material is even going to be much worse than unfilled plain PLA, obviously, due to its porosity and natural materials which can be eaten by bacteria and fungi. There is a reason why people do not recommend cutting meat on a wood plate, or why doctors discard the wood spatulas after they used it in a patient's mouth.

    If you want to use food-safe materials for printing toys, just to make sure the kids won't get poisoned by ingesting cadmium or poisonous plastics, when they accidentally bite in it, then PLA and PET would be "safe enough", I guess. If you want to make drinking cups, spoons, forks, dish plates, and similar stuff for repeated use in the mouth, nothing is going to be safe.

  • Link to post
    Share on other sites

    There are food safe filaments, but the act of printing will not let it be food safe unless you have a science level clean room to print and seal it with. The sealant would have to be food safe as well. All materials would have to be contained and handled in a sterilized way and area.

    Once that container is open, it is fair game to airborne pathogens and sneeze stuff, etc as well as what is floating around inside the build area.

    So, even if the hotend cooks out the organisms, then there is a lot of secondary ways of being contaminated.

    Also, most food safe filaments do not really stand up to the cleaning temps needed to keep it clean without softening.

  • Link to post
    Share on other sites

    I think the label of food safe applies to prior 3D printing. After 3D printing I don't think anything can still be considered foodsafe for multiple use. If you use a foodsafe materioal only once fairly fast after it was printed I think it should be fine (however 'official' legislation may not agree). If you want to use it multiple times, you probably have to post process it, so the material is sealed. In that case, it probably doesn't matter which material you use, since it will be sealed.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.

        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    • Create New...