Jump to content
thopiekar

SolidWorks plugin (official thread)

Recommended Posts

Posted · SolidWorks plugin (official thread)

Finally, a moment to try the newer version! I'm looking forward to it, will let you know what I find.

 

3 hours ago, thopiekar said:

 

@Gigi According to your reaction, I guess it should do that.

Made a note about it and will add more details on my website later.

 

Thank you for your interest and feedback on this!

One side benefit I didn't realize: File size! OMG, a high resolution object can be 100 MB or more as a decent STL, where the solidworks files are way smaller - doubly so for using "versions" in SW to make 20 objects from 1 file.

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

Um, I can "disable* the old plug-in, but not "uninstall" it, is there a chance that therein lies my problem? What (minimally) should I do to make sure I'm fully rid of the old one?

 

Edited by AbeFM
utterly wrong post.

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

That worked! Pretty explicit instruction on how to do it.

 

Drag-and-drop installer into cura and....

 

SUCCESS!

 

No idea on the quality issues yet, but the bug of not importing is either solved or making significant progress. Thanks!!!!

 

Print looks *very* round. Certainly better than 1*, but I suspect it's actually using mathematical curves instead of approximating it.

THIS. IS. AWESOME. I'd send you my life savings but it ain't worth the postage.

CurvySWimports.png

Edited by AbeFM
  • Like 1

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)
3 minutes ago, AbeFM said:

That worked! Pretty explicit instruction on how to do it.

 

No problem. Tried to keep it short and informative as much as possible.

 

4 minutes ago, AbeFM said:

No idea on the quality issues yet, but the bug of not importing is either solved or making significant progress. Thanks!!!!

Well, let me know whenever problems occur. Feedback is always welcome :+1:

 

Would you mind to tell me which SolidWorks version you are using?

Thanks!

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)
6 minutes ago, AbeFM said:

THIS. IS. AWESOME. I'd send you my life savings but it ain't worth the postage.

 

Haha, sounds like free beer for me :'D

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)

 

Having slicing issues due to stl's.

 

I had the same issue using the import macro as manually generating stl.

 

Any ideas? Maybe a post processing step is needed though it seems beyond the scope of this tool.

 

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)
2 hours ago, AbeFM said:

Any ideas? Maybe a post processing step is needed though it seems beyond the scope of this tool.

 

How do you mean? Is in your opinion the plugin also giving bad results? Or do you think it does it better compared to the manual STL export?

 

Thanks!

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

Could someone be so kind and convert the following file into STL and 3MF?

https://thopiekar.eu/download/_dev/CuraSolidWorksPluginTestCube.SLDPRT

 

Due to feedback from Ultimaker B.V. and people using SolidWorks 2017 and newer, there are issues with the plugin.

 

I need the files to fully understand what is going wrong.

At the moment I'm implementing a debug mode to the plugin, so it acts like any SolidWorks version is installed. So I can simulate the behaviour of the plugin on SolidWorks version, I even don't have.

 

Regards and enjoy your weekend!

Edited by thopiekar

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)
20 minutes ago, thopiekar said:

Could someone be so kind and convert the following file into STL and 3MF?

https://thopiekar.eu/download/_dev/CuraSolidWorksPluginTestCube.SLDPRT

 

Due to feedback from Ultimaker B.V. and people using SolidWorks 2017 and newer, there are issues with the plugin.

 

I need the files to fully understand what is going wrong.

At the moment I'm implementing a debug mode to the plugin, so it acts like any SolidWorks version is installed. So I can simulate the behaviour of the plugin on SolidWorks version, I even don't have.

 

Regards and enjoy your weekend!

I feel for you dude.....good luck!! :fingerscrossed:  :+1:

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)

@kmanstudios many thanks! I'm getting very close now. I guess it is a question of maximally an hour to get it done.

People, who know me good know that I'm not giving up too easily ;)

 

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)

When I taught myself programming (I made some games using Yoyo games' Gamemaker) I would sometimes beat myself up on a problem for a day or two. Then I would move on to something else that had to be done for the game like graphics. Usually the solution would flash across my visual field with completed algorithms or bits of code. i am weird that way. I can hyperfocus until the world goes away and all I experience is what I am thinking of. Kinda not fun when it would happen in the middle of a college class lecture whilst writing on the whiteboard. Sigh...students would then snap me back after calling to me a few times saying I just froze and stopped talking. siggghhhh.....

 

So, I do understand and I still feel for you though ;)

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)

Well, people told me often in life that I can't do things because of XY and won't manage. I'm normally motivated by things I believe and am convinced about.

So whenever I hear those XY complains, then this is putting me on fire.

 

Btw. the debug mode works. Now I'm also able to see another bug, which I was not believing in.

 

However, I still need the files produced by SolidWorks. Because the 3MF file I have here, just works fine. I definitely need a 3MF file made by SolidWorks, which is crashing my plugin.

1 hour ago, thopiekar said:

Could someone be so kind and convert the following file into STL and 3MF?

https://thopiekar.eu/download/_dev/CuraSolidWorksPluginTestCube.SLDPRT

 

 

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)
7 minutes ago, thopiekar said:

Well, people told me often in life that I can't do things because of XY and won't manage. I'm normally motivated by things I believe and am convinced about.

So whenever I hear those XY complains, then this is putting me on fire.

Right there widja boudreaux! :+1:

  • Like 1

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)

Fixed! Never forget that 3MF SceneNodes have their children ':D

 

A new testing version is up, soon.

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)
On 19.10.2017 at 10:44 PM, thopiekar said:

New version released. Had to do many tweaks to the code after finding different issues.

 

* Confirmed to work on 2017: https://github.com/thopiekar/CuraSolidWorksPlugin/issues/48#issuecomment-366527143

Edited by thopiekar

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

Put in 5.3 from the link above after deleting maco directory from CURA plugin folder.

 

First file always fails, subsequent files just hang, taking forever to "load", you can cancel them to try more. On restart it rejects the file as invalid again.

 

Win10,Cura3.2.0,Macro5.3 - drag-and-drop SW2013 file into Cura

2018-02-18 17_09_47-.png

Edited by AbeFM
  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

Hey @AbeFM

 

thank you for testing the plugin.

7 hours ago, AbeFM said:

Put in 5.3 from the link above after deleting maco directory from CURA plugin folder.

 

I'm unsure about what you wrote. Why did you remove the macro (?) directory? Or do you mean, that you removed the while plugin directory to uninstall it?

7 hours ago, AbeFM said:

First file always fails, subsequent files just hang, taking forever to "load", you can cancel them to try more. On restart it rejects the file as invalid again.

 

Can you send me your log file?

 

Sorry, that the plugin does not work for you anymore whereas I managed to fix it for SWX 2017:

https://github.com/thopiekar/CuraSolidWorksPlugin/issues/48#issuecomment-366586668

 

PS: And it would be useful to reproduce the error by sending me the exported STL of the file you were trying to open.

 

Regards :) 

Edited by thopiekar

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

Certainly, and sorry for the slow response!

 

How do I "send you a log" - CURA's log, or your macro's? Where do I find said "log"? :-)

 

The files were any files I opened, the one posted earlier just as well - SLDPRT from SW2016 - the same files that worked with macro 0.5.1

 

 

Edited by AbeFM

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

 

Log file was 100+ MB, so I just took a few sections that had the word "solidworks" in them a lot. Hope it helps!

 

s skirt_brim_minimal_length="250" -s conical_overhang_angle="50" -s raft_smoothing="5" -s jerk_wall="20" -s wall_thickness="0.8" -s zig_zaggify_infill="True" -s ironing_pattern="zigzag" -s conical_overhang_enabled="False" -s ironing_only_highest_layer="False" -s meshfix="0" -s multiple_mesh_overlap="0.15" -s acceleration_travel="5000" -s raft_surface_jerk="20" -s support_z_distance="0.1" -s raft_speed="42.5" -s speed_infill="85" -s retraction_speed="25" -s wall_line_count="2" -s center_object="False" -s speed_support_bottom="56.666666666666664" -s material_initial_print_temperature="190" -s layer_start_y="0.0" -s mold_angle="40" -s speed_equalize_flow_enabled="False" -s skin_overlap_mm="0.02" -s jerk_support_infill="20" -s raft_interface_line_width="0.8" -s z_seam_y="636" -s support_use_towers="False" -s prime_tower_wipe_enabled="True" -s support_interface_density="100" -s mesh_position_z="0" -s brim_outside_only="True" -e0 -l "0"
2018-02-20 09:09:59,876 - DEBUG - [(2388)-Thread-17] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] There are empty layers (or layers with empty extruder plans) in the print! Temperature control and cross layer travel moves might suffer.
2018-02-20 09:10:00,793 - DEBUG - [(17364)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [582]: Slicing took 5.789367437362671 seconds
2018-02-20 09:10:00,794 - DEBUG - [(17364)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [591]: See if there is more to slice...
2018-02-20 09:10:00,794 - DEBUG - [(6840)-Thread-4] CuraEngineBackend.ProcessSlicedLayersJob.run [70]: Processing new layer for build plate 0...
2018-02-20 09:10:00,852 - DEBUG - [(17364)-MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2018-02-20 09:10:00,857 - DEBUG - [(17364)-MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2018-02-20 09:10:00,861 - DEBUG - [(17364)-MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2018-02-20 09:10:00,864 - DEBUG - [(17364)-MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [722]: Backend quit with return code 0. Resetting process and socket.
2018-02-20 09:10:01,163 - DEBUG - [(6840)-Thread-4] CuraEngineBackend.ProcessSlicedLayersJob.run [236]: Processing layers took 0.3682224750518799 seconds
2018-02-20 09:10:01,200 - DEBUG - [(17364)-MainThread] CuraEngineBackend.CuraEngineBackend._onProcessLayersFinished [750]: See if there is more to slice(2)...
2018-02-20 09:11:11,925 - DEBUG - [(17364)-MainThread] RemovableDriveOutputDevice.RemovableDriveOutputDevice.requestWrite [81]: Writing to G:/4_GelMold1.gcode
2018-02-20 09:11:12,020 - INFO - [(15972)-Thread-5] SliceInfoPlugin.SliceInfoJob.run [29]: Sending anonymous slice info to [https://stats.ultimaker.com/api/cura]...
2018-02-20 09:11:12,150 - WARNING - [(8380)-Thread-6] GCodeWriter.GCodeWriter._serialiseSettings [129]: No extruder quality profile found, not writing quality for extruder custom_extruder_2 #3 to file!
2018-02-20 09:11:12,151 - WARNING - [(8380)-Thread-6] GCodeWriter.GCodeWriter._serialiseSettings [129]: No extruder quality profile found, not writing quality for extruder custom_extruder_3 #3 to file!
2018-02-20 09:11:12,153 - WARNING - [(8380)-Thread-6] GCodeWriter.GCodeWriter._serialiseSettings [129]: No extruder quality profile found, not writing quality for extruder custom_extruder_4 #3 to file!
2018-02-20 09:11:12,154 - WARNING - [(8380)-Thread-6] GCodeWriter.GCodeWriter._serialiseSettings [129]: No extruder quality profile found, not writing quality for extruder custom_extruder_5 #3 to file!
2018-02-20 09:11:12,156 - WARNING - [(8380)-Thread-6] GCodeWriter.GCodeWriter._serialiseSettings [129]: No extruder quality profile found, not writing quality for extruder custom_extruder_6 #3 to file!
2018-02-20 09:11:12,158 - WARNING - [(8380)-Thread-6] GCodeWriter.GCodeWriter._serialiseSettings [129]: No extruder quality profile found, not writing quality for extruder custom_extruder_7 #3 to file!
2018-02-20 09:11:12,160 - WARNING - [(8380)-Thread-6] GCodeWriter.GCodeWriter._serialiseSettings [129]: No extruder quality profile found, not writing quality for extruder custom_extruder_8 #3 to file!
2018-02-20 09:11:12,162 - DEBUG - [(8380)-Thread-6] UM.FileHandler.WriteFileJob.run [61]: Writing file took 0.14137554168701172 seconds
2018-02-20 09:11:12,859 - INFO - [(15972)-Thread-5] SliceInfoPlugin.SliceInfoJob.run [33]: Sent anonymous slice info.
2018-02-20 09:11:15,232 - INFO - [(17364)-MainThread] RemovableDriveOutputDevice.RemovableDrivePlugin.ejectDevice [44]: Attempting to eject the device
2018-02-20 09:11:15,293 - INFO - [(17364)-MainThread] RemovableDriveOutputDevice.RemovableDrivePlugin.ejectDevice [51]: Succesfully ejected the device
2018-02-20 16:29:35,755 - DEBUG - [(17364)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\toolhandle.shader]...
2018-02-20 16:29:36,643 - WARNING - [(17364)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
2018-02-20 16:29:48,879 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.preRead [328]: Showing wizard, if needed..
2018-02-20 16:29:48,885 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksDialogHandler.showConfigUI [118]: Showing wizard is not needed.. (preference = True)
2018-02-20 16:29:48,885 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksDialogHandler.showConfigUI [126]: Waiting for UI to close..
2018-02-20 16:29:48,887 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksDialogHandler.waitForUIToClose [108]: Waitiung for UI to close..
2018-02-20 16:29:56,000 - DEBUG - [(17364)-MainThread] CuraSolidWorksPlugin.SolidWorksDialogHandler.onOkButtonClicked [136]: Clicked on OkButton
2018-02-20 16:29:56,016 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksDialogHandler.waitForUIToClose [110]: Got lock and releasing it now..
2018-02-20 16:29:56,017 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksDialogHandler.waitForUIToClose [112]: Lock released!
2018-02-20 16:29:56,017 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.preRead [333]: Continuing to convert file..
2018-02-20 16:29:56,018 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [25]: Calling SldWorks.Application.24...
2018-02-20 16:29:56,019 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [27]: CreateActiveObject..
2018-02-20 16:29:56,076 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [366]: Mayor version is: 24
2018-02-20 16:29:56,076 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [367]: Minor version is: 3
2018-02-20 16:29:56,077 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [368]: Patch version is: 0
2018-02-20 16:29:56,077 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.getFriendlyName [103]: revision_major is: 24
2018-02-20 16:29:56,077 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.startApp [417]: Started: SolidWorks 2016
2018-02-20 16:29:56,083 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [140]: ... and opening file.
2018-02-20 16:29:56,087 - INFO - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.getOpenDocuments [479]: Found 1 open files..
2018-02-20 16:29:56,090 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.openForeignFile [586]: Foreign file has already been opened!
2018-02-20 16:29:56,092 - INFO - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.getOpenDocuments [479]: Found 1 open files..
2018-02-20 16:29:56,117 - INFO - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [144]: Trying to convert into one of: ['stl']
2018-02-20 16:29:56,117 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [146]: Trying to convert <LogMomSpcr.SLDPRT>...
2018-02-20 16:29:56,117 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [151]: Using suggested tempdir: 'C:\\Users\\Abe\\AppData\\Local\\Temp'
2018-02-20 16:29:56,118 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [157]: ... into 'stl' format: <C:\Users\Abe\AppData\Local\Temp\04ae3517-3388-4673-985c-46192a584935.STL>
2018-02-20 16:29:56,137 - INFO - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.exportFileAs [699]: Using fine quality for 3D printing!
2018-02-20 16:29:56,512 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [182]: Found temporary file! (size: 2.9011573791503906MB)
2018-02-20 16:29:56,514 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [207]: Using reader: STLReader
2018-02-20 16:29:56,537 - DEBUG - [(1444)-Thread-7] UM.Mesh.MeshData.calculateNormalsFromVertices [421]: Calculating normals took 0.008019685745239258 seconds
2018-02-20 16:29:56,541 - DEBUG - [(1444)-Thread-7] STLReader.STLReader.read [79]: Loaded a mesh with 182520 vertices
2018-02-20 16:29:56,543 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.readOnSingleAppLayer [219]: Removing temporary stl file, called <C:\Users\Abe\AppData\Local\Temp\04ae3517-3388-4673-985c-46192a584935.STL>
2018-02-20 16:29:56,544 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.closeApp [424]: Rolling back changes on app_frame.
2018-02-20 16:29:56,622 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.closeApp [431]: Rolling back changes on app_instance.
2018-02-20 16:29:56,623 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.closeApp [441]: Closed SolidWorks.
2018-02-20 16:29:56,625 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.postCloseApp [71]: postCloseApp..
2018-02-20 16:29:56,625 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.SolidWorksReader.nodePostProcessing [762]: Doing postprocessing on: [<UM.Scene.SceneNode.SceneNode object at 0x0000025B81CE3B70>]
2018-02-20 16:29:56,625 - DEBUG - [(1444)-Thread-7] CuraSolidWorksPlugin.CadIntegrationUtils.CommonReader.renameNodes [106]: File path in mesh was: C:\Users\Abe\AppData\Local\Temp\04ae3517-3388-4673-985c-46192a584935.STL
2018-02-20 16:29:56,628 - ERROR - [(1444)-Thread-7] UM.Logger.logException [82]: Exception: Exception occurred while loading file C:/Users/Abe/Google Drive/3D_Printing/Objects/~AbeStuff/LogMomSpcr.SLDPRT
2018-02-20 16:29:56,631 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-20 16:29:56,632 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:   File "X:\3.2\build\inst\lib\python3.5\site-packages\UM\FileHandler\ReadFileJob.py", line 66, in run
2018-02-20 16:29:56,633 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:   File "X:\3.2\build\inst\lib\python3.5\site-packages\UM\Mesh\MeshFileHandler.py", line 28, in readerRead
2018-02-20 16:29:56,635 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonComReader.py", line 79, in read
2018-02-20 16:29:56,637 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:     result = self.readOnMultipleAppLayer(options)
2018-02-20 16:29:56,638 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonReader.py", line 277, in readOnMultipleAppLayer
2018-02-20 16:29:56,640 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:     self.nodePostProcessing(options, scene_node_list)
2018-02-20 16:29:56,641 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\SolidWorksReader.py", line 767, in nodePostProcessing
2018-02-20 16:29:56,643 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:     revision = self.getRevisionNumber(options)
2018-02-20 16:29:56,644 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\SolidWorksReader.py", line 362, in getRevisionNumber
2018-02-20 16:29:56,645 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]:     revision_number = options["app_instance"].RevisionNumber
2018-02-20 16:29:56,647 - ERROR - [(1444)-Thread-7] UM.Logger.logException [86]: KeyError: 'app_instance'
2018-02-20 16:29:56,882 - DEBUG - [(17364)-MainThread] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.3399028778076172 seconds. 16560 input vertices. 16560 output vertices.
2018-02-20 16:29:56,900 - WARNING - [(17364)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
2018-02-20 16:30:05,137 - DEBUG - [(17364)-MainThread] UM.Qt.QtApplication.windowClosed [345]: Shutting down cura
2018-02-20 16:30:05,346 - DEBUG - [(17364)-MainThread] CuraEngineBackend.CuraEngineBackend._terminate [262]: Attempting to kill the engine process
2018-02-20 16:30:59,416 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FileLogger
2018-02-20 16:30:59,536 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FirmwareUpdateChecker
2018-02-20 16:30:59,557 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeProfileReader
2018-02-20 16:30:59,599 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeReader
2018-02-20 16:30:59,617 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeWriter
2018-02-20 16:30:59,647 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ImageReader
2018-02-20 16:30:59,670 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LegacyProfileReader
2018-02-20 16:30:59,696 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalContainerProvider
2018-02-20 16:30:59,732 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalFileOutputDevice
2018-02-20 16:30:59,756 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MachineSettingsAction
2018-02-20 16:30:59,777 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MonitorStage
2018-02-20 16:30:59,808 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PerObjectSettingsTool
2018-02-20 16:30:59,831 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PluginBrowser
2018-02-20 16:30:59,853 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PostProcessingPlugin
2018-02-20 16:30:59,874 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PrepareStage
2018-02-20 16:30:59,909 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RemovableDriveOutputDevice
2018-02-20 16:30:59,971 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimulationView
2018-02-20 16:31:00,003 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SliceInfoPlugin
2018-02-20 16:31:00,026 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SolidView
2018-02-20 16:31:00,050 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CameraTool
2018-02-20 16:31:00,077 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MirrorTool
2018-02-20 16:31:00,106 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RotateTool
2018-02-20 16:31:00,139 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ScaleTool
2018-02-20 16:31:00,161 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SelectionTool
2018-02-20 16:31:00,192 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin TranslateTool
2018-02-20 16:31:00,247 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UltimakerMachineActions
2018-02-20 16:31:00,353 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UM3NetworkPrinting
2018-02-20 16:31:00,385 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UpdateChecker
2018-02-20 16:31:00,386 - INFO - [(756)-Thread-3] UpdateChecker.UpdateCheckerJob.run [34]: Checking for new version of cura
2018-02-20 16:31:00,460 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin USBPrinting
2018-02-20 16:31:00,479 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UserAgreementPlugin
2018-02-20 16:31:00,522 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade21to22
2018-02-20 16:31:00,545 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade22to24
2018-02-20 16:31:00,569 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade25to26
2018-02-20 16:31:00,593 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade26to27
2018-02-20 16:31:00,614 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade27to30
2018-02-20 16:31:00,641 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade30to31
2018-02-20 16:31:00,664 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimpleView
2018-02-20 16:31:00,694 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin X3DReader
2018-02-20 16:31:00,734 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XmlMaterialProfile
2018-02-20 16:31:00,763 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XRayView
2018-02-20 16:31:00,781 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin BarbarianPlugin
2018-02-20 16:31:00,819 - INFO - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [11]: Python version: sys.version_info(major=3, minor=5, micro=2, releaselevel='final', serial=0)
2018-02-20 16:31:00,820 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [14]: Found 3rd-party directory and adding in into PYTHONPATH.
2018-02-20 16:31:00,821 - INFO - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [18]: Looking for win32com in Cura..
2018-02-20 16:31:00,827 - INFO - [(756)-Thread-3] UpdateChecker.UpdateCheckerJob.run [70]: Found a new version of the software. Spawning message
2018-02-20 16:31:00,833 - INFO - [(16756)-MainThread] UM.Logger.logException [82]: Exception: .. Probably couldn't find it. Using our own..
2018-02-20 16:31:00,843 - INFO - [(16756)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-20 16:31:00,845 - INFO - [(16756)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\__init__.py", line 19, in <module>
2018-02-20 16:31:00,848 - INFO - [(16756)-MainThread] UM.Logger.logException [86]:     import win32com
2018-02-20 16:31:00,850 - INFO - [(16756)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\..\3rd-party\win32com\__init__.py", line 5, in <module>
2018-02-20 16:31:00,852 - INFO - [(16756)-MainThread] UM.Logger.logException [86]:     import win32api, sys, os
2018-02-20 16:31:00,854 - INFO - [(16756)-MainThread] UM.Logger.logException [86]: ImportError: No module named 'win32api'
2018-02-20 16:31:00,854 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [46]: sys.path: ['C:\\Program Files\\Ultimaker Cura 3.2', 'C:\\Program Files\\Ultimaker Cura 3.2\\python35.zip', 'C:\\Program Files\\Ultimaker Cura 3.2\\DLLs', 'C:\\Program Files\\Ultimaker Cura 3.2\\lib', 'C:\\Program Files\\Ultimaker Cura 3.2', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\ComFactory\\..\\3rd-party', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\pythonwin', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\win32', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\win32\\lib', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\pywin32_system32']
2018-02-20 16:31:00,994 - INFO - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [51]: ComFactory: Using pywin32!
2018-02-20 16:31:01,045 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [25]: Calling SldWorks.Application.24...
2018-02-20 16:31:01,045 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [27]: CreateActiveObject..
2018-02-20 16:31:01,050 - DEBUG - [(16756)-MainThread] UM.Logger.logException [82]: Exception: Getting active object without Coinit failed
2018-02-20 16:31:01,065 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-20 16:31:01,067 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonComReader.py", line 31, in startApp
2018-02-20 16:31:01,070 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:     options["app_instance"] = ComConnector.CreateActiveObject(options["app_name"])
2018-02-20 16:31:01,072 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\PyWin32Connector.py", line 22, in CreateActiveObject
2018-02-20 16:31:01,074 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:     return win32com.client.GetActiveObject(app_name)
2018-02-20 16:31:01,076 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\..\3rd-party\win32com\client\__init__.py", line 79, in GetActiveObject
2018-02-20 16:31:01,077 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:     dispatch = pythoncom.GetActiveObject(resultCLSID)
2018-02-20 16:31:01,079 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]: pywintypes.com_error: (-2147221021, 'Operation unavailable', None, None)
2018-02-20 16:31:01,079 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [37]: CoInit..
2018-02-20 16:31:01,081 - DEBUG - [(16756)-MainThread] UM.Logger.logException [82]: Exception: Getting active object with Coinit failed
2018-02-20 16:31:01,083 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-20 16:31:01,085 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonComReader.py", line 38, in startApp
2018-02-20 16:31:01,086 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:     ComConnector.CoInit()
2018-02-20 16:31:01,087 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\PyWin32Connector.py", line 25, in CoInit
2018-02-20 16:31:01,088 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]:     pythoncom.CoInitializeEx(pythoncom.COINIT_MULTITHREADED)
2018-02-20 16:31:01,090 - DEBUG - [(16756)-MainThread] UM.Logger.logException [86]: pywintypes.com_error: (-2147417850, 'Cannot change thread mode after it is set.', None, None)
2018-02-20 16:31:01,091 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [49]: Trying to get new class object..
2018-02-20 16:31:01,111 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [366]: Mayor version is: 24
2018-02-20 16:31:01,112 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [367]: Minor version is: 3
2018-02-20 16:31:01,112 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [368]: Patch version is: 0
2018-02-20 16:31:01,113 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getFriendlyName [103]: revision_major is: 24
2018-02-20 16:31:01,113 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.startApp [417]: Started: SolidWorks 2016
2018-02-20 16:31:01,114 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [366]: Mayor version is: 24
2018-02-20 16:31:01,115 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [367]: Minor version is: 3
2018-02-20 16:31:01,115 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [368]: Patch version is: 0
2018-02-20 16:31:01,118 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [424]: Rolling back changes on app_frame.
2018-02-20 16:31:01,119 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [431]: Rolling back changes on app_instance.
2018-02-20 16:31:01,120 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [441]: Closed SolidWorks.
2018-02-20 16:31:01,120 - INFO - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getOpenDocuments [479]: Found 0 open files..
2018-02-20 16:31:01,121 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.checkForBasicFunctions [239]: Looks like we opened SolidWorks and there are no open files. Let's close SolidWorks again!
2018-02-20 16:31:01,122 - DEBUG - [(16756)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.postCloseApp [71]: postCloseApp..
2018-02-20 16:31:01,122 - INFO - [(16756)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.isVersionOperational [298]: Success! Installation of 'SldWorks.Application.24' seems to be valid!
2018-02-20 16:31:01,427 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CuraSolidWorksPlugin
2018-02-20 16:31:01,526 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin OrientationPlugin
2018-02-20 16:31:01,554 - INFO - [(16756)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ZOffsetPlugin
2018-02-20 16:31:01,571 - INFO - [(16756)-MainThread] UM.VersionUpgradeManager.upgrade [113]: Looking for old configuration files to upgrade.
2018-02-20 16:31:02,993 - DEBUG - [(16756)-MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2018-02-20 16:31:03,044 - INFO - [(16756)-MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe
2018-02-20 16:31:03,047 - DEBUG - [(16756)-MainThread] UM.Backend.Backend._backendLog [90]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 3.2\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\\Program Files\\Ultimaker Cura 3.2\\resources\\definitions\\fdmprinter.def.json', '']
2018-02-20 16:31:03,167 - DEBUG - [(15816)-Thread-14] UM.Backend.Backend._backendLog [90]: [Backend] 
2018-02-20 16:31:03,169 - DEBUG - [(15816)-Thread-14] UM.Backend.Backend._backendLog [90]: [Backend] Cura_SteamEngine version DEV
2018-02-20 16:31:03,170 - DEBUG - [(15816)-Thread-14] UM.Backend.Backend._backendLog [90]: [Backend] Copyright (C) 2017 Ultimaker
2018-02-20 16:31:03,175 - DEBUG - [(15816)-Thread-14] UM.Backend.Backend._backendLog [90]: [Backend] 
2018-02-20 16:31:03,176 - DEBUG - [(16756)-MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2018-02-20 

TRIMMED


2018-02-21 13:59:48,222 - DEBUG - [(16756)-MainThread] CuraEngineBackend.CuraEngineBackend._terminate [262]: Attempting to kill the engine process
2018-02-21 14:21:29,303 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FileLogger
2018-02-21 14:21:29,416 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FirmwareUpdateChecker
2018-02-21 14:21:29,434 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeProfileReader
2018-02-21 14:21:29,480 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeReader
2018-02-21 14:21:29,499 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeWriter
2018-02-21 14:21:29,528 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ImageReader
2018-02-21 14:21:29,546 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LegacyProfileReader
2018-02-21 14:21:29,566 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalContainerProvider
2018-02-21 14:21:29,592 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalFileOutputDevice
2018-02-21 14:21:29,614 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MachineSettingsAction
2018-02-21 14:21:29,634 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MonitorStage
2018-02-21 14:21:29,663 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PerObjectSettingsTool
2018-02-21 14:21:29,684 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PluginBrowser
2018-02-21 14:21:29,706 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PostProcessingPlugin
2018-02-21 14:21:29,725 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PrepareStage
2018-02-21 14:21:29,756 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RemovableDriveOutputDevice
2018-02-21 14:21:29,803 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimulationView
2018-02-21 14:21:29,829 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SliceInfoPlugin
2018-02-21 14:21:29,851 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SolidView
2018-02-21 14:21:29,875 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CameraTool
2018-02-21 14:21:29,904 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MirrorTool
2018-02-21 14:21:29,937 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RotateTool
2018-02-21 14:21:29,968 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ScaleTool
2018-02-21 14:21:29,990 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SelectionTool
2018-02-21 14:21:30,019 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin TranslateTool
2018-02-21 14:21:30,066 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UltimakerMachineActions
2018-02-21 14:21:30,171 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UM3NetworkPrinting
2018-02-21 14:21:30,203 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UpdateChecker
2018-02-21 14:21:30,206 - INFO - [(18260)-Thread-3] UpdateChecker.UpdateCheckerJob.run [34]: Checking for new version of cura
2018-02-21 14:21:30,285 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin USBPrinting
2018-02-21 14:21:30,308 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UserAgreementPlugin
2018-02-21 14:21:30,352 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade21to22
2018-02-21 14:21:30,377 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade22to24
2018-02-21 14:21:30,402 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade25to26
2018-02-21 14:21:30,427 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade26to27
2018-02-21 14:21:30,451 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade27to30
2018-02-21 14:21:30,480 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade30to31
2018-02-21 14:21:30,505 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimpleView
2018-02-21 14:21:30,537 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin X3DReader
2018-02-21 14:21:30,574 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XmlMaterialProfile
2018-02-21 14:21:30,595 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XRayView
2018-02-21 14:21:30,617 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin BarbarianPlugin
2018-02-21 14:21:30,646 - INFO - [(18260)-Thread-3] UpdateChecker.UpdateCheckerJob.run [70]: Found a new version of the software. Spawning message
2018-02-21 14:21:30,651 - INFO - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [11]: Python version: sys.version_info(major=3, minor=5, micro=2, releaselevel='final', serial=0)
2018-02-21 14:21:30,651 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [14]: Found 3rd-party directory and adding in into PYTHONPATH.
2018-02-21 14:21:30,651 - INFO - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [18]: Looking for win32com in Cura..
2018-02-21 14:21:30,658 - INFO - [(2220)-MainThread] UM.Logger.logException [82]: Exception: .. Probably couldn't find it. Using our own..
2018-02-21 14:21:30,662 - INFO - [(2220)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-21 14:21:30,663 - INFO - [(2220)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\__init__.py", line 19, in <module>
2018-02-21 14:21:30,664 - INFO - [(2220)-MainThread] UM.Logger.logException [86]:     import win32com
2018-02-21 14:21:30,666 - INFO - [(2220)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\..\3rd-party\win32com\__init__.py", line 5, in <module>
2018-02-21 14:21:30,669 - INFO - [(2220)-MainThread] UM.Logger.logException [86]:     import win32api, sys, os
2018-02-21 14:21:30,671 - INFO - [(2220)-MainThread] UM.Logger.logException [86]: ImportError: No module named 'win32api'
2018-02-21 14:21:30,672 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [46]: sys.path: ['C:\\Program Files\\Ultimaker Cura 3.2', 'C:\\Program Files\\Ultimaker Cura 3.2\\python35.zip', 'C:\\Program Files\\Ultimaker Cura 3.2\\DLLs', 'C:\\Program Files\\Ultimaker Cura 3.2\\lib', 'C:\\Program Files\\Ultimaker Cura 3.2', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\ComFactory\\..\\3rd-party', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\pythonwin', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\win32', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\win32\\lib', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\pywin32_system32']
2018-02-21 14:21:30,754 - INFO - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [51]: ComFactory: Using pywin32!
2018-02-21 14:21:30,808 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [25]: Calling SldWorks.Application.24...
2018-02-21 14:21:30,808 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [27]: CreateActiveObject..
2018-02-21 14:21:30,811 - DEBUG - [(2220)-MainThread] UM.Logger.logException [82]: Exception: Getting active object without Coinit failed
2018-02-21 14:21:30,821 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-21 14:21:30,822 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonComReader.py", line 31, in startApp
2018-02-21 14:21:30,823 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:     options["app_instance"] = ComConnector.CreateActiveObject(options["app_name"])
2018-02-21 14:21:30,825 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\PyWin32Connector.py", line 22, in CreateActiveObject
2018-02-21 14:21:30,826 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:     return win32com.client.GetActiveObject(app_name)
2018-02-21 14:21:30,827 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\..\3rd-party\win32com\client\__init__.py", line 79, in GetActiveObject
2018-02-21 14:21:30,828 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:     dispatch = pythoncom.GetActiveObject(resultCLSID)
2018-02-21 14:21:30,830 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]: pywintypes.com_error: (-2147221021, 'Operation unavailable', None, None)
2018-02-21 14:21:30,830 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [37]: CoInit..
2018-02-21 14:21:30,832 - DEBUG - [(2220)-MainThread] UM.Logger.logException [82]: Exception: Getting active object with Coinit failed
2018-02-21 14:21:30,834 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-21 14:21:30,835 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonComReader.py", line 38, in startApp
2018-02-21 14:21:30,837 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:     ComConnector.CoInit()
2018-02-21 14:21:30,838 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\PyWin32Connector.py", line 25, in CoInit
2018-02-21 14:21:30,840 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]:     pythoncom.CoInitializeEx(pythoncom.COINIT_MULTITHREADED)
2018-02-21 14:21:30,842 - DEBUG - [(2220)-MainThread] UM.Logger.logException [86]: pywintypes.com_error: (-2147417850, 'Cannot change thread mode after it is set.', None, None)
2018-02-21 14:21:30,842 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [49]: Trying to get new class object..
2018-02-21 14:21:38,202 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [366]: Mayor version is: 24
2018-02-21 14:21:38,203 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [367]: Minor version is: 3
2018-02-21 14:21:38,203 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [368]: Patch version is: 0
2018-02-21 14:21:38,204 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getFriendlyName [103]: revision_major is: 24
2018-02-21 14:21:38,204 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.startApp [417]: Started: SolidWorks 2016
2018-02-21 14:21:38,240 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [366]: Mayor version is: 24
2018-02-21 14:21:38,240 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [367]: Minor version is: 3
2018-02-21 14:21:38,240 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [368]: Patch version is: 0
2018-02-21 14:21:38,305 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [424]: Rolling back changes on app_frame.
2018-02-21 14:21:38,306 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [431]: Rolling back changes on app_instance.
2018-02-21 14:21:38,309 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [441]: Closed SolidWorks.
2018-02-21 14:21:38,310 - INFO - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getOpenDocuments [479]: Found 0 open files..
2018-02-21 14:21:38,311 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.checkForBasicFunctions [239]: Looks like we opened SolidWorks and there are no open files. Let's close SolidWorks again!
2018-02-21 14:21:38,313 - DEBUG - [(2220)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.postCloseApp [71]: postCloseApp..
2018-02-21 14:21:38,314 - INFO - [(2220)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.isVersionOperational [298]: Success! Installation of 'SldWorks.Application.24' seems to be valid!
2018-02-21 14:21:39,761 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CuraSolidWorksPlugin
2018-02-21 14:21:39,884 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin OrientationPlugin
2018-02-21 14:21:39,909 - INFO - [(2220)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ZOffsetPlugin
2018-02-21 14:21:39,933 - INFO - [(2220)-MainThread] UM.VersionUpgradeManager.upgrade [113]: Looking for old configuration files to upgrade.
2018-02-21 14:21:41,446 - DEBUG - [(2220)-MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2018-02-21 14:21:41,509 - INFO - [(2220)-MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe
2018-02-21 14:21:41,516 - DEBUG - [(2220)-MainThread] UM.Backend.Backend._backendLog [90]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 3.2\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\\Program Files\\Ultimaker Cura 3.2\\resources\\definitions\\fdmprinter.def.json', '']
2018-02-21 14:21:41,645 - DEBUG - [(17120)-Thread-14] UM.Backend.Backend._backen

TRIMMED!


2018-02-21 14:22:04,806 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FileLogger
2018-02-21 14:22:04,851 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FirmwareUpdateChecker
2018-02-21 14:22:04,858 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeProfileReader
2018-02-21 14:22:04,876 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeReader
2018-02-21 14:22:04,883 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeWriter
2018-02-21 14:22:04,892 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ImageReader
2018-02-21 14:22:04,901 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LegacyProfileReader
2018-02-21 14:22:04,909 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalContainerProvider
2018-02-21 14:22:04,920 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalFileOutputDevice
2018-02-21 14:22:04,931 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MachineSettingsAction
2018-02-21 14:22:04,938 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MonitorStage
2018-02-21 14:22:04,951 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PerObjectSettingsTool
2018-02-21 14:22:04,962 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PluginBrowser
2018-02-21 14:22:04,972 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PostProcessingPlugin
2018-02-21 14:22:04,980 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PrepareStage
2018-02-21 14:22:04,993 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RemovableDriveOutputDevice
2018-02-21 14:22:05,014 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimulationView
2018-02-21 14:22:05,026 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SliceInfoPlugin
2018-02-21 14:22:05,034 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SolidView
2018-02-21 14:22:05,044 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CameraTool
2018-02-21 14:22:05,056 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MirrorTool
2018-02-21 14:22:05,068 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RotateTool
2018-02-21 14:22:05,082 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ScaleTool
2018-02-21 14:22:05,091 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SelectionTool
2018-02-21 14:22:05,104 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin TranslateTool
2018-02-21 14:22:05,121 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UltimakerMachineActions
2018-02-21 14:22:05,189 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UM3NetworkPrinting
2018-02-21 14:22:05,204 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UpdateChecker
2018-02-21 14:22:05,206 - INFO - [(16052)-Thread-3] UpdateChecker.UpdateCheckerJob.run [34]: Checking for new version of cura
2018-02-21 14:22:05,237 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin USBPrinting
2018-02-21 14:22:05,245 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UserAgreementPlugin
2018-02-21 14:22:05,259 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade21to22
2018-02-21 14:22:05,269 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade22to24
2018-02-21 14:22:05,280 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade25to26
2018-02-21 14:22:05,290 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade26to27
2018-02-21 14:22:05,299 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade27to30
2018-02-21 14:22:05,309 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade30to31
2018-02-21 14:22:05,318 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimpleView
2018-02-21 14:22:05,336 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin X3DReader
2018-02-21 14:22:05,353 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XmlMaterialProfile
2018-02-21 14:22:05,363 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XRayView
2018-02-21 14:22:05,371 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin BarbarianPlugin
2018-02-21 14:22:05,378 - INFO - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [11]: Python version: sys.version_info(major=3, minor=5, micro=2, releaselevel='final', serial=0)
2018-02-21 14:22:05,378 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [14]: Found 3rd-party directory and adding in into PYTHONPATH.
2018-02-21 14:22:05,379 - INFO - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [18]: Looking for win32com in Cura..
2018-02-21 14:22:05,382 - INFO - [(1488)-MainThread] UM.Logger.logException [82]: Exception: .. Probably couldn't find it. Using our own..
2018-02-21 14:22:05,385 - INFO - [(1488)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-21 14:22:05,386 - INFO - [(1488)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\__init__.py", line 19, in <module>
2018-02-21 14:22:05,388 - INFO - [(1488)-MainThread] UM.Logger.logException [86]:     import win32com
2018-02-21 14:22:05,389 - INFO - [(1488)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\..\3rd-party\win32com\__init__.py", line 5, in <module>
2018-02-21 14:22:05,391 - INFO - [(1488)-MainThread] UM.Logger.logException [86]:     import win32api, sys, os
2018-02-21 14:22:05,393 - INFO - [(1488)-MainThread] UM.Logger.logException [86]: ImportError: No module named 'win32api'
2018-02-21 14:22:05,393 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [46]: sys.path: ['C:\\Program Files\\Ultimaker Cura 3.2', 'C:\\Program Files\\Ultimaker Cura 3.2\\python35.zip', 'C:\\Program Files\\Ultimaker Cura 3.2\\DLLs', 'C:\\Program Files\\Ultimaker Cura 3.2\\lib', 'C:\\Program Files\\Ultimaker Cura 3.2', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\ComFactory\\..\\3rd-party', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\pythonwin', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\win32', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\win32\\lib', 'C:\\Users\\Abe\\AppData\\Roaming\\cura\\3.2\\plugins\\CuraSolidWorksPlugin\\CuraSolidWorksPlugin\\CadIntegrationUtils\\3rd-party\\pywin32_system32']
2018-02-21 14:22:05,410 - INFO - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.ComFactory.<module> [51]: ComFactory: Using pywin32!
2018-02-21 14:22:05,430 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [25]: Calling SldWorks.Application.24...
2018-02-21 14:22:05,430 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [27]: CreateActiveObject..
2018-02-21 14:22:05,433 - DEBUG - [(1488)-MainThread] UM.Logger.logException [82]: Exception: Getting active object without Coinit failed
2018-02-21 14:22:05,436 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-21 14:22:05,438 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonComReader.py", line 31, in startApp
2018-02-21 14:22:05,439 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:     options["app_instance"] = ComConnector.CreateActiveObject(options["app_name"])
2018-02-21 14:22:05,440 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\PyWin32Connector.py", line 22, in CreateActiveObject
2018-02-21 14:22:05,441 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:     return win32com.client.GetActiveObject(app_name)
2018-02-21 14:22:05,443 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\..\3rd-party\win32com\client\__init__.py", line 79, in GetActiveObject
2018-02-21 14:22:05,444 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:     dispatch = pythoncom.GetActiveObject(resultCLSID)
2018-02-21 14:22:05,445 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]: pywintypes.com_error: (-2147221021, 'Operation unavailable', None, None)
2018-02-21 14:22:05,445 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [37]: CoInit..
2018-02-21 14:22:05,447 - DEBUG - [(1488)-MainThread] UM.Logger.logException [82]: Exception: Getting active object with Coinit failed
2018-02-21 14:22:05,449 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]: Traceback (most recent call last):
2018-02-21 14:22:05,450 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\CommonComReader.py", line 38, in startApp
2018-02-21 14:22:05,453 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:     ComConnector.CoInit()
2018-02-21 14:22:05,454 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:   File "C:\Users\Abe\AppData\Roaming\cura\3.2\plugins\CuraSolidWorksPlugin\CuraSolidWorksPlugin\CadIntegrationUtils\ComFactory\PyWin32Connector.py", line 25, in CoInit
2018-02-21 14:22:05,455 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]:     pythoncom.CoInitializeEx(pythoncom.COINIT_MULTITHREADED)
2018-02-21 14:22:05,456 - DEBUG - [(1488)-MainThread] UM.Logger.logException [86]: pywintypes.com_error: (-2147417850, 'Cannot change thread mode after it is set.', None, None)
2018-02-21 14:22:05,456 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.startApp [49]: Trying to get new class object..
2018-02-21 14:22:05,544 - INFO - [(16052)-Thread-3] UpdateChecker.UpdateCheckerJob.run [70]: Found a new version of the software. Spawning message
2018-02-21 14:22:09,166 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [366]: Mayor version is: 24
2018-02-21 14:22:09,167 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [367]: Minor version is: 3
2018-02-21 14:22:09,167 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [368]: Patch version is: 0
2018-02-21 14:22:09,167 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getFriendlyName [103]: revision_major is: 24
2018-02-21 14:22:09,168 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.startApp [417]: Started: SolidWorks 2016
2018-02-21 14:22:09,169 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [366]: Mayor version is: 24
2018-02-21 14:22:09,169 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [367]: Minor version is: 3
2018-02-21 14:22:09,169 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getRevisionNumber [368]: Patch version is: 0
2018-02-21 14:22:09,171 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [424]: Rolling back changes on app_frame.
2018-02-21 14:22:09,172 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [431]: Rolling back changes on app_instance.
2018-02-21 14:22:09,174 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.closeApp [441]: Closed SolidWorks.
2018-02-21 14:22:09,174 - INFO - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.getOpenDocuments [479]: Found 0 open files..
2018-02-21 14:22:09,175 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.checkForBasicFunctions [239]: Looks like we opened SolidWorks and there are no open files. Let's close SolidWorks again!
2018-02-21 14:22:09,223 - DEBUG - [(1488)-MainThread] CuraSolidWorksPlugin.CadIntegrationUtils.CommonComReader.postCloseApp [71]: postCloseApp..
2018-02-21 14:22:09,223 - INFO - [(1488)-MainThread] CuraSolidWorksPlugin.SolidWorksReader.isVersionOperational [298]: Success! Installation of 'SldWorks.Application.24' seems to be valid!
2018-02-21 14:22:10,588 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CuraSolidWorksPlugin
2018-02-21 14:22:10,649 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin OrientationPlugin
2018-02-21 14:22:10,665 - INFO - [(1488)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ZOffsetPlugin
2018-02-21 14:22:10,678 - INFO - [(1488)-MainThread] UM.VersionUpgradeManager.upgrade [113]: Looking for old configuration files to upgrade.
2018-02-21 14:22:11,594 - DEBUG - [(1488)-MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2018-02-21 14:22:11,612 - INFO - [(1488)-MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe
2018-02-21 14:22:11,614 - DEBUG - [(1488)-MainThread] UM.Backend.Backend._backendLog [90]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 3.2\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\\Program Files\\Ultimaker Cura 3.2\\resources\\definitions\\fdmprinter.def.json', '']

 

Edited by AbeFM

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)

You catched an interesting bug!

Everything works fine, but I'm asking SolidWorks something after closing it. Therefore no one to talk with.

 

I'll look tomorrow into the code and look for a solution.

 

Additionally, can you answer me one question maybe?: If you export an STL manually and open it in Cura, is it correctly orientated?

 

(For the next time do not copy paste content from the log, but upload the file directly. If it is to huge, close Cura, remove it, reproduce the bug and close Cura again. The new file should be smaller. Forum maintainers could rate this amount of text as spam.)

Share this post


Link to post
Share on other sites
Posted (edited) · SolidWorks plugin (official thread)

What do you mean by "correctly"? When I do that, exporting STL from soildworks, +z is +z. Frustrating because their "top" plane 5a8dfbfebf851_2018-02-2115_08_23-SOLIDWORKSPremium2016x64Edition-Part1.thumb.png.c97040c8f44abb1d8a7fae4ab347f74c.png

is not the X-Y plane as one would expect. So when I draw a "top down" view as if looking at the print bed, I have to remember to do that drawing on the "front" (X-Y) plane.

 

Things drawn on the "front" plane come out on the printbed after exporting. Attached find an STl, forum won't let me post part.

 

IkeaAppleSlicerBottom_SPRITTA.STL

2018-02-21 15_08_23-SOLIDWORKS Premium 2016 x64 Edition - [Part1].png

Edited by AbeFM

Share this post


Link to post
Share on other sites
Posted · SolidWorks plugin (official thread)

Alright, so the autorotation feature in the plugin is useful for you.

Now I looked again into your log and noticed you are using SolidWorks 2016. Somehow I can remember, that someone mentioned using SolidWorks 2013.

 

The reason I'm asking is, that I do not know for which SolidWorks versions this rotation is needed.

If I would know that the misorientation is there since SolidWorks offers STL export, then I could do the re-orientation just generally.

At the moment I'm checking whether SolidWorks >= 2016 is installed.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 46 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!