Jump to content
jonatanrullman

Finding old minor versions of Cura

Recommended Posts

Posted · Finding old minor versions of Cura

Hi,

Last tuesday I upgraded to Cura 3.0.3. I believe I had 3.0.0 before that (though it could have been 3.0.1 or 3.0.2). I am having the weirdest issue with under extrusion and gaps inside perimeters and the only thing left I can think of is something in Cura.

But for the life of me I can't find 3.0.0 for mac to download anywhere and see if the issue disappears.

Anyone know where that can be found?

Cheers

Share this post


Link to post
Share on other sites
Posted · Finding old minor versions of Cura

Hmm. Must have 3.0.2 I had then. I have never had a beta.

3.0.2 shows the same problem to a point. Though I have found a very weird discrepancy in the default settings between 3.0.2 and 3.0.3.

The hunt goes on.

Share this post


Link to post
Share on other sites
Posted · Finding old minor versions of Cura

The only difference between 3.0.2 and 3.0.3 is that 3.0.3 does support the makeprintable plugin.

Share this post


Link to post
Share on other sites
Posted · Finding old minor versions of Cura

I'm still hunting this problem. It seems that it may have been two issues rolled into one. Possibly combined with a bug in 3.0.3 where infill overlap percentage does not reset. But I haven't tested that thoroughly yet.

The main problem was severe under extrusion above certain speeds which caused some really weird gaps to form while the rest of the print looked perfect.

I initially tested simplify which didn't show the problem. But I have since concluded that it was simply because the speeds where set lower. Cura 3.0.2 does seem to slice this particular model better though for some reason. But it might very well be my imagination combined with solving some of the other problems.

If I can substantiate that there is in fact a bug in 3.0.3 I will be sure to report it.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 11 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!