Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up
ian

Post your Ultimaker HAPPY CORNER photos !!! :-)

Recommended Posts

Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Same here but those other missing perks do tend to move the WAF higher up on the list of priorities :)

 

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Hmmmm... that little kitchen trolley looks like a very good idea. My whole "living room table" is pretty much the "Ultimaker-table" now and it's a bloody mess. Moving it to something like this, with it's limited space, would force me to keep it a bit more tidy. Maybe buy two and fuse them together so my old UMO can get off the floor and actually be used again.

Being able to sit on the couch while tinkering sure is comfy though...

 

went for the trolley, as it was buy a £35 ikea trolley, or pay another £80 for an extra half a meter of work surface, good thing is trolley will be the same height as (healthy) stand up work surface, and i cant imagine you would have much success with an ultimaker on a shelf on the wall!

i do like the couch idea, maybey the living room table may get a use after-all...

 

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Here's My Happy Corner. I can view the printer from my couch and if the printer is to noisy i just wheel it to a back room. :smile:

SAM 0203

SAM 0207

SAM 0208

 

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Ha ha .. funny place to keep a pet .. think i prefer nancy's dog :)

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Well I don't need to feed it or clean up its poo. Plus it tasted great. :-)

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Heyhey

Here are my four love and hate walls :wink:

Arbeitsplatz

 

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

I think, now it's time to show my (temporary) happy four walls. :cool:

It's - hm, how to say, - hm - somehow a heated chamber....reducing warping nearly perfect :D

happy corner

... also good for noise reduction. :cool:

 

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

LOL sigi, we should be drinking a few beers after skiing and then going into your happy corner...not sure a sauna is best for the UM2 haha :p

 

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Wow, that's so tidy and full of nice prints!

 

Thanks....been running my UM2 almost non stop since I got it end of February.....easy to do in this workspace. :-P

 

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

It still needs a bit of polish such as moulding to hide the screws but it's basically done. Well, except for one thing that really was the purpose of building this in the first place, a fan and filter. I guess I'll add that later... Took a bit more time and effort than I had hoped but I'm glad it's finally done.

Sorry about the overexposed pics, too tired to take new ones right now :p

This is what I needed that measurement for, @SandervG :)

enclosure01.thumb.jpg.ede2b9bdd73266e66de0d94cbdecada8.jpg

enclosure02.thumb.jpg.ae85c6b238b297f5de6308b1d4588f20.jpg

enclosure03.thumb.jpg.95b9a253414c6d049aaf479a28bee000.jpg

enclosure04.thumb.jpg.c8a4afed4062dc17baa025119c2075f6.jpg

enclosure05.thumb.jpg.54105347a8adaecca54e28739ceaef86.jpg

enclosure01.thumb.jpg.ede2b9bdd73266e66de0d94cbdecada8.jpg

enclosure02.thumb.jpg.ae85c6b238b297f5de6308b1d4588f20.jpg

enclosure03.thumb.jpg.95b9a253414c6d049aaf479a28bee000.jpg

enclosure04.thumb.jpg.c8a4afed4062dc17baa025119c2075f6.jpg

enclosure05.thumb.jpg.54105347a8adaecca54e28739ceaef86.jpg

  • Like 8

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

@iroberti: What a mess! I think you really should have sorted them by size... or by age... ;)

Great piece of furnature... :)

  • Like 1

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

I hope mine some day will look as clean as that :O

image.thumb.jpg.7a5bd4b5b1959a670219a4b516bfac08.jpg

image.thumb.jpg.7a5bd4b5b1959a670219a4b516bfac08.jpg

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

@neotko

My printing room definately looks more like yours :)

And I like to be able to see my printers from the side... see the filament. ..

  • Like 1

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

@dim3nsioneer , I did that just because I knew it would piss someone off :D

@neotko , check the first page for my first entry in this thread ;)

@ultiarjan , fair point but to be honest it's so rare that something goes wrong with the spool that I don't really mind not seeing back there during operation. You need to open it up to start the print and/or change the filament so that's when I'll look over the spool and make sure it's doing ok.

Also, I'm thinking about buying a bunch of spool holders and mount them on the inner part of the lid. I should be able to store 6-7 spools that way. Not sure though, might just add a bunch of weight for no real good reason.

Really need to figure out filtering though. Would be nice to get rid of smells and any nasties, if any (I know there isn't much, but still, if you can minimize, why not).

  • Like 1

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

@dim3nsioneer , I did that just because I knew it would piss someone off :D

 

I have a different theory. You will replace the UMO by the UM3... then it's chronological again... ;)

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Now there's an idea. Hey, Ultimaker, hurry up with the new version! :p

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Really need to figure out filtering though. Would be nice to get rid of smells and any nasties, if any (I know there isn't much, but still, if you can minimize, why not).

 

I 'm thinking of installing a ventilator (like the one's in a bathroom) in my printroom for the occasional ABS print. Lets say I also more or less cover the top (I now only cover the front) would having the ventilator in the ceiling +/- 1m above the printer create to much draft ? Anybody any experience in the best location (v.s. the printer) to place a ventilator?

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

Here's my little corner (half of my home office) that I do various little hobbies.

um2-everything-corner-sm.jpg?dl=0&raw=1

As you can see, I've bought a few things from IKEA. I have some 3D Printing, Legos (Technic, Mindstorm, etc), Electronics stuff, plus a bunch of other random stuff in my little corner.

Just created a post on that IKEA Drawer unit I transferred my UM2 to.

  • Like 1

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

It still needs a bit of polish such as moulding to hide the screws but it's basically done. Well, except for one thing that really was the purpose of building this in the first place, a fan and filter. I guess I'll add that later... Took a bit more time and effort than I had hoped but I'm glad it's finally done.

Sorry about the overexposed pics, too tired to take new ones right now :p

This is what I needed that measurement for, @SandervG :)

enclosure01.thumb.jpg.ede2b9bdd73266e66de0d94cbdecada8.jpg

enclosure02.thumb.jpg.ae85c6b238b297f5de6308b1d4588f20.jpg

enclosure03.thumb.jpg.95b9a253414c6d049aaf479a28bee000.jpg

enclosure04.thumb.jpg.c8a4afed4062dc17baa025119c2075f6.jpg

enclosure05.thumb.jpg.54105347a8adaecca54e28739ceaef86.jpg

This i like. I'm using one UM2 Non-stop. Not healty i think. I would like to get rid of the noise and smell.

The drawers are very nice. I would add some air extraction as well.

Share this post


Link to post
Share on other sites
Posted · Post your Ultimaker HAPPY CORNER photos !!! :-)

20151027_220100.thumb.jpg.9ea111ae9ced09053d503db56a2001c4.jpg

I have an actual corner for my UMO, sitting pretty on top of a steamer chest my great(great, not sure how many greats are in there) grandmother took with all of her belongings to start a new life in America. My happy corner/Ultimaker also has a severe case of attracting all the tools from every corner of my house. Need to get some led strips to make it shinny and bright.

20151027_220100.thumb.jpg.9ea111ae9ced09053d503db56a2001c4.jpg

Share this post


Link to post
Share on other sites
Posted (edited) · Post your Ultimaker HAPPY CORNER photos !!! :-)

Nice happy corner.

If your grandma only new that nowadays you don't have to travel to America, you just 3D print it...

Edited by Guest

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Essentials
      Ultimaker Essentials is an enterprise-grade package of Ultimaker software products with greater stability, uniformity, and a higher level of security. 
      • 0 replies
    • Cura settings: Improving naming and descriptions
      - Maybe you'd like to see more detailed descriptions for each setting?
      - Maybe you'd like to see some settings in a different category?
      - Maybe you'd like to see a completely new category?
       
      Give us your feedback in this thread and we'll consider it for future releases.
        • Like
      • 5 replies
×
×
  • Create New...