Jump to content
Ultimaker Community of 3D Printing Experts

UM3 extreme clog midprint...


Recommended Posts

Posted · UM3 extreme clog midprint...

Dear everyone UM,

We have been printing with the UM3 for about a year now without any big issues.

This weekend however, something went terribly wrong.

Somehow, this giant PLA clog formed around the nozzle, eventually pushing out the front fan cover (see included pictures).

Now, we have no real clue on what has happened and what do next?

We have not used a new routine for printing than we have always used and never had anything similar.

What I suspect is that the fan cover might have opened up during printing (one of the magnets did come loose before), forming this bucket for the print material to clog.

Only, I have no idea what caused the front cover to open. Anyone any suggestions?

I have dismantled the print head and now just have the big clunk of PLA stuck to the print cores.

Any idea if it is even doable to remove the material and any tips on how to remove it?

Any help is greatly appreciated!

Kind regards,

Jesse

5a3340d34f35a_2017-11-1309_31_43.thumb.jpg.58abcc9c0add174c8297d006c4462c1c.jpg5a3340d2f362f_2017-11-1309_31_47.thumb.jpg.a78c526f94ac769f9f6813cda87b5b53.jpg5a3340d3a2281_2017-11-1309_43_23.thumb.jpg.ccad00b02ec2a19bd2326b7c69afbdea.jpg5a3340d3e18ee_2017-11-1310_51_21.thumb.jpg.726cf7800fd705e65146931e5a4613c7.jpg

5a3340d34f35a_2017-11-1309_31_43.thumb.jpg.58abcc9c0add174c8297d006c4462c1c.jpg

5a3340d2f362f_2017-11-1309_31_47.thumb.jpg.a78c526f94ac769f9f6813cda87b5b53.jpg

5a3340d3a2281_2017-11-1309_43_23.thumb.jpg.ccad00b02ec2a19bd2326b7c69afbdea.jpg

5a3340d3e18ee_2017-11-1310_51_21.thumb.jpg.726cf7800fd705e65146931e5a4613c7.jpg

  • Link to post
    Share on other sites
    Posted · UM3 extreme clog midprint...

    Nothing actually printed? Usually this happens when the print detaches from the plate.

    I guess it could happen that the front cover opens itself somehow and this would certainly cause a mess.

    As korneel suggested it is cleanable but you probably need some new parts

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...