Jump to content

Um2go firmware


woodpac9

Recommended Posts

Posted · Um2go firmware

The UM2Go has no heated buildplate by default. That's why there's no standard firmware from Ultimaker that supports it.

What kind of heated buildplate is it (i think there are not that many out there...)? Can you reinstall the former firmware version (which one was it)?

  • Link to post
    Share on other sites

    Posted · Um2go firmware

    If it's the heated bed from 3dsolex then I recommend the latest tinker Marlin here:

    https://github.com/TinkerGnome/Ultimaker2Marlin/releases

    Make sure to fill out the heater budget settings. The total budget should be 60W, the heater is 60W and the nozzle is probably 35W. If you don't fill these out properly you can either overload the power supply which will fail a print part way through. Or you could have trouble getting the bed up to temperature if you error in the other direction.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...