Jump to content

Print Text Without Base Material

Recommended Posts

Posted · Print Text Without Base Material

Hello. I'm trying to print solid letters with no base (i.e. cutout stand alone letters). My approach thus far has been to use a graphics program to create the letters, save as an image, then import to Cura.

Photoshop > PNG > Cura > Ultimaker 2+

Here's an example of my image file from Photoshop


What I'm seeing is Cura does not seem to respect transparency. When I import a PNG or GIF that has transparency enabled, Cura displays a solid block.

With transparency disabled, I will see the extruded letters, but always with what I believe is considered a "base".


Even though I'm setting the base value to 0mm in the import image dialog.


Thanks for your help and patience. I'm completely new to CAD software and 3D printing. My first post to the forum.

Share this post

Link to post
Share on other sites
Posted · Print Text Without Base Material

I have never tried this approach via images, so I can't comment on that.

But if you want to print 3D-shapes, letters or whatever else, I would suggest you design them in a 3D-editor. Then you can get everything right in the 3D-editor itself. And you can slant the edges, etc.

I use DesignSpark Mechanical. This is good freeware by RS Components, and only requires registration. It is a limited version of the commercial SpaceClaim 3D-editor. This has an easy to learn interface, similar to SketchUp. There are lots of good training videos available on Youtube. In a few hours you can design simple objects. In a few days, you can design complex objects.

However, it has no built-in text features, so you have to work around: or draw the characters yourself, or import them from another editor, or use the "dimensioning tool" instead. Google for: how to make text in designspark mechanical.

Try to avoid SketchUp: this causes problems, since a lot of shapes are not "watertight": thus they are no solids, but sort of "cardboard" models with infinite thin walls.

You can set the text in SketchUp, export it, and import the skp-file in DesignSpark Mechanical. But then you have to repair these defects due to non-closed vectors manually first. And then in DesignSpark Mechanical, you can extrude it into 3D, slant edges, and do whatever else you want.

Before trying any editor, watch a few demo-videos on Youtube first, to see if you like the workflow.

Share this post

Link to post
Share on other sites
Posted (edited) · Print Text Without Base Material

If you wish to go this route (Opening a bitmap into Cura) then do so with darker is higher.Then push the model below the print plate to cut off the base.

Although, the best way to do it is what geert_2 said.

There are a lot of vector packages that can use fonts to create outlines from and then import into a variety of 3D packages for extrusion and beveling. Beveling is important.

Edited by Guest

Share this post

Link to post
Share on other sites
Posted · Print Text Without Base Material

I discovered by doing a test print that while the Cura display seems to suggest that a flat layer of material will be printed around the text, it in fact does not print that way. The printer draws a very fine line that follows the border of what's displayed in Cura, but does not fill it in. So I ultimately get what I was wanting.

Share this post

Link to post
Share on other sites
Posted (edited) · Print Text Without Base Material

In case my description wasn't clear, here's a photo of the border I described.



I guess this is considered the "skirt"?

Edited by DennisV

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • January 22nd  | Ultimaker webinar 'Learn how to choose the right composite material'
      We’ll teach you how to choose the right composite material for your application in our new 40-minute webinar. You will learn how to: 
      • Make the perfect choice between glass and carbon fiber 
      • Identify more high-value applications that would benefit from composites 
      • 3D print advanced materials with the right settings 
      • Select the best materials for 3D printing end-use parts 
      • Use dual extrusion to take composite 3D printing to the next level 
      • 0 replies
    • Does your company use Ultimaker? Know one that does? Let us know!
      If your company uses Ultimaker in any capacity, we'd love to hear about it! If the story is there, and you're up for it, maybe we can work together to create a story that will be featured on the site. Here are examples of..
      • 18 replies
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!