Jump to content

Plug-In Pause at height


pixl2

Recommended Posts

Posted · Plug-In Pause at height

Hallo zusammen

 

Kurze Frage zu dem Plug-In Pause at height.

 

Wo genau wird beim aktivieren dieses Plugins die Pause eingeleitet?

Pause at heigt 3.95mm = Nach Abschluss der 3.95mm?

Pause at heigt 3.95mm = Vor Abschluss der 3.95mm?

 

Ich benötige dieses Plugin ca. 1x pro Jahr und immer wieder habe ich dieselben Probleme :'(

 

Komischerweise zeigt es mir im Cura 3.0.3 (Cura 3.1.0 habe ich für Dual offen gelassen was auch noch nicht wirklich funktioniert und dieselben Visuellen Ansichten zeigt) keinen Fahrt Weg an… siehe Foto:

5a4fc74e9c604_Cura3.0.01-Layer27.thumb.png.001967c4b02d15ba0e1ad17d08741759.png

 

 

Im alten Cura 15.04.6 zeigt es mir den Fahrt Weg jedoch an. Aber eben, da stelle ich mir die gleiche Frage (3.95mm Pause vor oder nach diesem Layer?).

5a4fc71e1d20a_Cura15_06.04-Layer27.thumb.png.04fe704b23882a74e9d2a743e5761855.png

 

 

Besten Dank und Gruss

pixl2

  • Link to post
    Share on other sites

    Posted · Plug-In Pause at height

    Hallo pixl2,

     

    das Plugin wird unmittelbar vor Erreichen des Z-Wertes aktiv. Hier z.B. Pause At Height Z5.000:

     

    ;LAYER:49
    ;TYPE:CUSTOM
    M83
    G1 E-5.000000 F6000
    G1 Z15 F300
    G1 X190.000000 Y190.000000 F9000
    M84 E0
    M0
    G1 E5.000000 F6000
    G1 E-5.000000 F6000
    G1 X120.341000 Y120.074000 Z5.000000 F9000
    G1 E5.000000 F6000
    G1 F9000
    M82
    G0 X120.341 Y120.074 Z5.000
    ;TYPE:FILL
    G1 F2400 X120.073 Y120.342 E1006.02879

     

    Viele Grüße

    • Like 1
    Link to post
    Share on other sites

    Posted (edited) · Plug-In Pause at height

    Hallo @mikar

     

    besten Dank für die Aufklärung. Leider hatte ich doch noch einen Fehldruck, dies war aber, weil ich beim Plug-In Pause at heigt die Standby Temperature und Resume Temperature auf 0°C gelassen habe anstatt diese richtig einzustellen. Durch deinen Anhang vom gcode habe ich meinen auch mal angeschaut (zum ersten mal) und weiss jetzt wenigstens auf was ich bei diesem Plug-In beachten muss. So wie es aussieht muss ich mich wohl öfters mal mit dem gcode beschäftigen. *| Immerhin war dies jetzt ein guter Anfang.

     

    Nochmals danke für deinen Hinweis, hat mir sehr geholfen.

     

     

    Gruss

    pixl2

     

    Edited by pixl2
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...