Jump to content
Ultimaker Community of 3D Printing Experts

Ultimaker Original - dual extrusion


Recommended Posts

Posted (edited) · Ultimaker Original - dual extrusion

I have made a nice Ultibot  (ultimaker robot remix pack) dual extrusion print with my UMO.

Thanks to Stijn van der Linden for this fantastic object.

Nice results with the newest  Cura.

 

I have rebuild the print-head, i have removed the "Corrugated spring washer".
All parts are hold together with 4 extra "Lock nuts M3" and 4 extra "square nuts M3" and extra "washers".

The build plate leveling and print-head fine tuning is not so difficult anymore. 

 

IMG_4963.JPG

IMG_4966.JPG

IMG_4965.JPG

IMG_4926.JPG

IMG_4955.JPG

IMG_4967.JPG

IMG_4968.JPG

Edited by TheSeend
  • Like 1
Link to post
Share on other sites
  • 1 month later...
Posted (edited) · Ultimaker Original - dual extrusion

I made the modification so that it is easier to level the nozzles.

I have removed the Corrugated spring washer.

The lock nuts keep the wooden parts of the printhead together.
The lock nuts have just been tightened, allowing the thumb bolts to rotate freely.
In order to enable the assembly of the cooling fan I made two spacers of washers.
The cooling fan is attached to the aluminum plate from below with an 8 mm bolt (I'm not entirely sure, but it can also be a 6 mm bolt or a 10 mm bolt).

 

Adjusting the nozzles:

  • Pull the bowden tube up slightly.
  • Raise the square nuts.
  • Adjust the nozzles by turning the four thumb bolts.
  • If the nozzles are correct leveled, the peek is clamped between the wooden plate and the aluminum plate by turning the square nuts downwards.
    This also fixes the nozzles.
  • Push the bowden tube downwards so that it presses firmly against the teflon tube.

Bold = Ultimaker parts, Bold/Italic = added parts

 

That is all ;-)

Edited by TheSeend
  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Our picks

    • Ultimaker Transformation Summit

      On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
      • 6 replies
    • New here? Register your Ultimaker for free 3D printer onboarding course
      Hi,
       
      Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
      Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
      They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
      Ready? Register your product here in just 60 seconds.
        • Like
      • 0 replies
×
×
  • Create New...