On 17/01/2018 at 6:42 PM, zizon said:En voila une comme neuve, je te la vend 1200€.
Question d'un nouveau sur le forum: c'est quoi ce cadavre d'imprimante? 
3 minutes ago, Brulti said:
Question d'un nouveau sur le forum: c'est quoi ce cadavre d'imprimante?
En résumé un mec avait pété les plombs avec son imprimante et au lieu de la donner a quelqu'un qui en aurait profité, a préféré l'exploser a la masse.
La connerie n'a pas de limite même chez les makers.
-
1
Fais attention : tu as l'axe Y qui est sorti de son logement (cf. photo juste devant).
Fais le tour de tous les axes et refait une calibration du plateau, du coup.
On 21/01/2018 at 3:23 AM, darkdvd said:Fais attention : tu as l'axe Y qui est sorti de son logement (cf. photo juste devant).
Fais le tour de tous les axes et refait une calibration du plateau, du coup.
Oeil de lynx!
-
Our picks
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 18 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
Release Notes: S-Line Firmware 8.3.0 (Latest)
Dustin posted a topic in Firmware,
S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
(Sorry, was out of office when this released)
This update is for...
All UltiMaker S series
New features
Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.-
-
- 0 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
prom 4
Oui, mais il est normal dans la vraie vie
Link to post
Share on other sites