Jump to content
Ultimaker Community of 3D Printing Experts

Firmware upload problem


Recommended Posts

Posted · Firmware upload problem

Hi Alexander, 

 

From you screenshots it looks like you are behind some sort of proxy that requires a login ("http://10.10.10.10/login.html?redirect= "). Are you on a network that requires a login before using the internet, e.g when using your phone? 

 

And how did you proceed downloading the latest firmware for the UM3, i.e. what files did you put on the USB stick from where? 

 

Kind regards, 

 

Raymond.

  • Link to post
    Share on other sites
    Posted · Firmware upload problem

    Hi Raymond

     

    I'm in that companys network with firewall and login but the job-transfering works and i tought update via USB-Stick must run anyway.

    For USB update i downloaded the latest Firmware a few days ago the day i posted and before the last one (the latest two where tested)

    According to Ultimaker.com guide i downloaded the latest.tar.tar and latest.tar.xz.tar (56994 and 1 kB) from the official Ultimaker site.

    I did it with different Versions and different USB Stick and i downloaded the files many times.

    It doesn't even seem to look at the USB Stick it just says "no Firmware found" quickly.

     

     

    Kind regards,

     

    Alexander

     

  • Link to post
    Share on other sites
    Posted · Firmware upload problem

    Should be "latest.tar.xz" and "latest.tar.xz.sig"

     

    I'm guessing you did that step right but double check the names of the files.

     

    Probably the printer can't read your USB stick at all.  You could put a file on there called a.gcode (doesn't matter what it contains) and go to the print menu to see if it sees your file.  If not it probably can't read *anything* on the USB stick.  Maybe find another USB stick and don't format it.  Or format it for FAT32.

     

    • Like 1
    Link to post
    Share on other sites
    Posted · Firmware upload problem

    fyi, the sig file is a cryptographic signature of the main file.  If the sig file doesn't match the main file then the printer won't install it.  This prevents accidental bricking of the printer and prevents 3rd parties from creating simple firmware installers for the UM3.

  • Link to post
    Share on other sites
    Posted (edited) · Firmware upload problem

    I printed allready many Jobs over USB so i guess this can't be the problem. Also tried many usb-sticks for the update.

    Why then are my files not correctly named, when i just download them and put them on the stick. No different versions at the first try. Just did what i was advised to.

     

    I now renamed the files, but have to wait till tomorrow to test it, because im printing actually a larger Job.

     

    Thanks for the help so far.

     

     

    Kind regards,

     

    Alexander

    Edited by visu-al
  • Link to post
    Share on other sites
    Posted (edited) · Firmware upload problem

    Hi Alexander,

     

    If you are downloading the files on a Windows machine it could be that you have "hide extension for known filenames enabled" and therefore you are not viewing the proper extension and it could be you saved it with the wrong extension. If i download the latest version now, my filenames are correct. Since you are doing a long print we can at least test the following without updating the printer yet:

     

    - If you are running Windows, make sure you have "extensions turned on", see: http://kb.winzip.com/kb/entry/26/ or https://www.thewindowsclub.com/show-file-extensions-in-windows

    - Then re-download the files from here: https://ultimaker.com/en/resources/23129-updating-the-firmware, check that the filenames are correct. 

     

    Kind regards, 

     

    Raymond.

     

     

    Edited by rsiudak
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...