Jump to content
Ultimaker Community of 3D Printing Experts

Material always stops extruding


Lionel-MSMI
 Share

Recommended Posts

Posted · Material always stops extruding

Halo the community,

 

I am on an urgent job and i am trying to print PLA or ABS with my Ultimaker 2+. The problem is that, after a certain time the material stops extruding because a hole has been digged in the filament as shown on the attached picture. Most of the time the material even gets break inside the tube.  I have tried changing the thightening in the feeder setting it on the two extremes but the result is same. 

 

can some one advice, please.

20180123_124140.jpg

  • Link to post
    Share on other sites

    Posted · Material always stops extruding

    Hi,

     

    I moved your topic as it was in the french section.

     

    The grinding you are experiencing might have multiple causes, from clogged nozzle to bad teflon, or bad filament.

     

    What brand is it?

     

    Is the printer old? How many hours?

     

    What speed and temperature are you using?

     

    As i said, many causes...

  • Link to post
    Share on other sites

    • 1 month later...
    Posted · Material always stops extruding

    Halo, 

     

    I'm sorry to reply this late.

    - I use an Ultimaker 2+,

    - It is approximately 20 months old,

    -  It ha 1240 hrs and 07 min of functioning

    - With 664 hrs and 58 min of printing time.

     

    I print PLA files at around 191 - 196°C  with a print speed of approximately  3  mm/s  to 5 mm/s for the model whose picture is attached. It is a gear with 5 mm OD, 10 teeths, and 5 mm height. 

    5 mm gear.PNG

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...