Jump to content
Ultimaker Community of 3D Printing Experts

Cura 3.2 crossing infill layer


Luis manson
 Share

Recommended Posts

Posted · Cura 3.2 crossing infill layer

Hello, im testing cura beta and got this weird problem were Cura makes the nozzle travel over the just printed support, making a weird noise, in one of my tests it cause the support to los adhesion to the bed.

Am i wrong with some settings? why not lift Z after the support, and before traveling to start a new layer.

 

attached gcode and picture of the problem (see the diagonal line in the left side?)

 

 

5a6e534322e7f_WhatsAppImage2018-01-28at19_47_40.thumb.jpeg.ebb23991dc878d1f7d5ad10937101cfe.jpeg

BQPI3H_v6mount-v5.gcode

  • Link to post
    Share on other sites

    Posted · Cura 3.2 crossing infill layer
    9 minutes ago, smartavionics said:

    Well, for starters you don't have z-hop enabled. Also, you have combing set to "all", you may want to try the other combing settings. Hope this helps.

     

    I ussialy use cura/repetier and simplify3d, never had to use z-hop. is this normal? 
    I'll look into the combing options, maybe i missunderstood something

  • Link to post
    Share on other sites

    Posted · Cura 3.2 crossing infill layer

    I will give z hop a try but I am seeing the exact same behavior on support or with cubic subdivision infill. I will say that I'm on 3.1 and not 3.2. This never used to happen and I have autobed leveling on so I'm a bit confused what changed.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...