This is a design that I am printing on the new UM3X to really test its long time printing capabilities. It is in progress right now with 5 days and 5 hours left....just now up to themiddle of the runners after 9 hours of printing. Printing in PLA at 0.1mm layer height. Size is 127.7mm x 126.4mm x 135.8mm. Made mostly with fractals with a bit of created parts by myself. Part of a much larger concept piece that will take a while to finish as it will have to be done in parts and for the most part,
It really did not.
I have 3D and 2D fractal generators. I see things when I am playing with them and then put the pieces together. As I said before, the original intent was for this to be some sort of fractal, alien horseshoe crab. But, as things got put together, it just sorta morphed. The human made things like the ski type of pods, seat and controls took about 30 minutes to make.
I have been modeling for so long that I am at that point where I would rather discover the