Jump to content
Ultimaker Community of 3D Printing Experts
cgfighter

Issue with cura 3.2 and monoprice select mini v2

Recommended Posts

I noticed when I upgraded Cura today that anytime I tried to any the monoprice mini select, it would crash immediately. After digging around it looks like the problem is in the malyan_m200.def.json file. It is used for providing definiations for the MP mini select. To fix the problem edit \Ultimaker Cura 3.2\resources\definitions\malyan_m200.def.json

 

About 2/3rds of the way down there is a line

 

"material_diameter": { "value": 1.75 },

Change it to

 

"material_diameter": { "default_value": 1.75 },

 

save and all should be good. Hope this helps

  • Thanks 1

Share this post


Link to post
Share on other sites
8 minutes ago, i_rupar said:

I noticed when I upgraded Cura today that anytime I tried to any the monoprice mini select, it would crash immediately. After digging around it looks like the problem is in the malyan_m200.def.json file. It is used for providing definiations for the MP mini select. To fix the problem edit \Ultimaker Cura 3.2\resources\definitions\malyan_m200.def.json

 

About 2/3rds of the way down there is a line

 

"material_diameter": { "value": 1.75 },

Change it to

 

"material_diameter": { "default_value": 1.75 },

 

save and all should be good. Hope this helps

That was the trick, thanks!

Share this post


Link to post
Share on other sites
On 2/6/2018 at 3:34 PM, cgfighter said:

I installed cura 3.2 twice and every time I try to select my printer "monoprice select mini v2"  it opens for a sec then closes the program. Any idea what could be happening? I am using windows 10 with the most recent updates if that helps

I get exactly the same behavior and I have the same printer. Also running fully updated Windows 10 64-bit.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 114 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!