Jump to content

Umo+ aluminum hot end holder measurements


Recommended Posts

Posted · Umo+ aluminum hot end holder measurements

i'm trying to make the aluminum hot end holder so ,

what are the circles diameters of  umo+ extruder aluminum hot end holder ?and what is the type of aluminum used in its manufacturing ?

alminiuum.jpg

  • Link to post
    Share on other sites

    Posted · Umo+ aluminum hot end holder measurements

    You can find the drawing and CAD model for this part on GitHub in the Ultimaker section.  The Ultimaker part number for this part  is B 1048-A2P-A "Print Head Hot End Holder".  The material listed on the drawing is aluminum alloy EN AW-6060 T66 which is similar to 6061-T6.  If you open the STEP file with any CAD program, you will be able to measure all of the part's dimensions.  The holes you are referring to are 14.0mm in diameter with 0.5mm x 45° chamfers on both sides.

    • Like 1
    Link to post
    Share on other sites

    Posted (edited) · Umo+ aluminum hot end holder measurements

    what about the aluminium base plate  of umo+ ?the aluminium alloy type ? and the dimensions or CAD too?

    hettt.PNG

    heaaat.jpg

    Edited by Migo
  • Link to post
    Share on other sites

    Posted · Umo+ aluminum hot end holder measurements

    Look here for all of the parts information for the UMO+:

     

    https://github.com/Ultimaker/Ultimaker-Original-Plus

     

    Once you find the part you need, look at the drawing (PDF) for the material.  Do a Google search if the material spec is not obvious.  For the dimensions, open the STEP file in any CAD program (SolidWorks, Inventor, Fusion360, OnShape, etc.) and you can measure all of the features.

     

    The part you are looking for is B1818-B Print Table Base Plate.

    • Like 1
    Link to post
    Share on other sites

    • 2 weeks later...

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...