Jump to content
Ultimaker Community of 3D Printing Experts

Blue PLA does not stick to base plate: "spaghetti" on extruder


esra
 Share

Recommended Posts

Posted · Blue PLA does not stick to base plate: "spaghetti" on extruder
Hi to all,

I am looking for help to solve a problem with PLA not sticking to the base plate. Instead, the extruder head pulls the material loose and a big "Spaghetti" ball is being formed on the extruder head.

The problem started after having placed a new reel of blue PLA material (1616)
Before we used a reel of gray PLA material (supplied with the machine) without any problems.

Already we have done the following steps without improvement:
* factory reset
* cleaning the nozzle
* checking the temperature (nozzle 210, base plate 60)
* adding a layer of glue to the base plate

No solutions up till now.

What to do next?

Thanks in advance for suggestions
Regards,
Silvio Rademaker



  • Link to post
    Share on other sites

    Posted · Blue PLA does not stick to base plate: "spaghetti" on extruder

    Silvio,

     

    I always use painter tape and stick glue on all my prints , for me it minimizes having to keep an eye on the prints as much.

    I print Ultimaker blue this way with no problems,

     

     

    Regards

    Frank

  • Link to post
    Share on other sites

    Posted · Blue PLA does not stick to base plate: "spaghetti" on extruder

    Hi MechDesigner,

     

    Thanks for tape tip. I will certainly try it out.

     

    Today I got a print running with increased tip temperature (from 210 to 230). Also I have cleaned the base plate thoroughly. Seems that the glue trick doesnt work for us.

     

    We have the printer on a school so I suspect that the heavy use leaves a residue that hampers the sticking.

     

    Instead of cleaning with windowfluid (scary combination with electronis) I think the tape is a clever solution. I might even try to lower the temperature.

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...