Jump to content
Ultimaker Community of 3D Printing Experts
OOC

Second Print on new printer

Recommended Posts

Hello all,

My first print was the UM3 robot that came with the USB drive. It came out great.

So I decided to print another piece and on the image below you can see that print was messing up. The part that you are seeing is the base of the print that touches the glass bed. For some reason its printing bumps and lifting up from the print bed. I thought I would try a second print and I received the exact same results from the print bed.

 

***Before print*** I cleaned the glass with soap and water and dried it really well. Then I used a very light layer of glue on the print bed.

 

Can someone please tell me why this is happening? 

 

Thanks

Flat piece Messed up.jpg

Share this post


Link to post
Share on other sites

OK here is a second print.  on these pictures, the two corners are completely lifted and basically melted on the front. The back side is having the same issues as the above picture.

Sorry for the cheesy writing on the pics. It was done off of my iPad.

 

Thanks

Lifted front corner.jpg

Back.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!