Jump to content
OOC

Second Print on new printer

Recommended Posts

Posted · Second Print on new printer

Hello all,

My first print was the UM3 robot that came with the USB drive. It came out great.

So I decided to print another piece and on the image below you can see that print was messing up. The part that you are seeing is the base of the print that touches the glass bed. For some reason its printing bumps and lifting up from the print bed. I thought I would try a second print and I received the exact same results from the print bed.

 

***Before print*** I cleaned the glass with soap and water and dried it really well. Then I used a very light layer of glue on the print bed.

 

Can someone please tell me why this is happening? 

 

Thanks

Flat piece Messed up.jpg

Share this post


Link to post
Share on other sites
Posted · Second Print on new printer

OK here is a second print.  on these pictures, the two corners are completely lifted and basically melted on the front. The back side is having the same issues as the above picture.

Sorry for the cheesy writing on the pics. It was done off of my iPad.

 

Thanks

Lifted front corner.jpg

Back.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!